Skip to content
This repository was archived by the owner on Apr 4, 2025. It is now read-only.

Milestones

List view

  • 0.3.0

    Overdue by 10 year(s)
    •
    Due by December 17, 2015
    •0/1 issues closed
    0% complete1 open0 closed

  • 0.2.0

    * Adapt framework to accommodate models from new collaborators * Swappability of key models: ** Benchmarking of NREL and DTU turbine aero-structural design codes ** HAWC2/FAST ** WAsP/OpenWind * Standard input/output files for ** wind turbine ** wind farm * High fidelity FE and CFD geometry

    Overdue by 10 year(s)
    •
    Due by May 31, 2015
    •3/13 issues closed
    23% complete10 open3 closed

  • rotor aero-structural optimisation using FUSED-Wind

    the turbine module should be used for my AIAA paper on aero-structural optimisation of the DTU 10MW RWT. For this work we use BECAS and HAWCStab2. Implement necessary interfaces to deal with I/O from these codes.

    Overdue by 11 year(s)
    •
    Due by December 1, 2014
    •1/1 issues closed
    100% complete0 open1 closed

  • Speed improvement on plant_flow

    There are many potential nested assemblies in `fusedwind.plant_flow`. This can create some speed challenges, especially with the CaseIteratorDrivers, that copy things around (see #12).

    No due date
    •1/1 issues closed
    100% complete0 open1 closed

  • Making plant_flow.wake operational

    plant_flow.wake has been broken since the introduction of the new CaseIteratorDriver and the new fused wind interface. It needs repairs.

    Overdue by 11 year(s)
    •
    Due by October 10, 2014
    •1/4 issues closed
    25% complete3 open1 closed