Dreame L20 Ultra Additional Attributes and values

[jimjaeger]

Hello,

the L20 Ultra has additional attributes and additional values (e.g. for state) and features like camera.
How can I add these to the UI? How can I add translation for the new values? How can I add the camera stream?

fan_speed_list: Silent, Standard, Strong, Turbo
battery_level: 100
battery_icon: mdi:battery
fan_speed: Strong
mop_pad: true
mop_pad_humidity: Slightly dry
mop_pad_humidity_list: Slightly dry, Moist, Wet
self_clean_area: 20
self_clean_area_min: 10
self_clean_area_max: 35
previous_self_clean_area: 20
status: Sleeping
cleaning_mode_list: Sweeping, Mopping, Sweeping and mopping, Mopping after sweeping
cleaning_mode: Sweeping and mopping
suction_level_list: Quiet, Standard, Strong, Turbo
suction_level: Strong
tight_mopping: false
error: No error
low_water_warning: No warning
cleaning_time: 0
cleaned_area: 0
voice_packet_id: DE
timezone: Europe/Berlin
main_brush_time_left: 296
main_brush_left: 98
side_brush_time_left: 196
side_brush_left: 98
filter_left: 97
filter_time_left: 146
mop_pad_left: 96
mop_pad_time_left: 77
silver_ion_left: 100
silver_ion_time_left: 365
detergent_left: 94
detergent_time_left: 17
total_cleaned_area: 157
total_cleaning_time: 194
cleaning_count: 13
customized_cleaning: 0
serial_number: XXXXXXXXXXXX
nation_matched: matched
total_runtime: 0
total_cruise_time: 0
drying_progress: 0
cleaning_progress: 0
intelligent_recognition: false
multi_floor_map: false
wetness_level: 3
scheduled_clean: false
mop_wash_level_list: Deep, Daily, Water saving
mop_wash_level: Daily
voice_assistant_language_list: Default, English, German, Chinese
voice_assistant_language: Default
auto_empty_mode: Standard
auto_empty_mode_list: Off, Standard, High frequency, Low frequency
auto_dust_collecting: true
auto_empty_status: Idle
self_clean: false
drying_time: 3
sensor_dirty_left: 89
sensor_dirty_time_left: 26
mopping_mode: 2
auto_drying: false
max_suction_power: false
custom_mopping_mode: true
cleaning_route_list: Quick, Standard
cleaning_route: Standard
cleangenius_list: Off, Routine cleaning, Deep cleaning
cleangenius: Off
dnd: 
'0':
  enabled: true
  start: '22:00'
  end: '08:00'

cleaning_sequence: null
charging: true
started: false
paused: false
running: false
returning_paused: false
returning: false
segment_cleaning: false
zone_cleaning: false
spot_cleaning: false
cruising: false
vacuum_state: charging_completed
has_saved_map: true
has_temporary_map: false
mapping: false
mapping_available: false
dust_collection_available: true
washing: false
washing_paused: false
drying: false
low_water: false
washing_available: true
drying_available: true
draining_available: false
cleangenius_cleaning: false
active_segments: null
current_segment: 1
selected_map: Karte/Landkarte1
rooms: 
Karte/Landkarte1:
  - id: 1
    name: Living Room
    icon: mdi:sofa-outline
  - id: 2
    name: Corridor
    icon: mdi:foot-print
  - id: 3
    name: Kitchen
    icon: mdi:chef-hat
  - id: 4
    name: Primary Bedroom
    icon: mdi:bed-king-outline
  - id: 5
    name: Bathroom
    icon: mdi:toilet

capabilities: lidar_navigation, multi_floor_map, ai_detection, self_wash_base, auto_empty_base, mop_pad_lifting, customized_cleaning, auto_switch_settings, mop_pad_unmounting, mopping_after_sweeping, wifi_map, backup_map, dnd, dnd_task, shortcuts, drainage, carpet_recognition, fill_light, voice_assistant, mop_pad_swing, off_peak_charging, max_suction_power, obstacle_image_crop, auto_empty_mode, tight_mopping, floor_material, floor_direction_cleaning, cleangenius, intensive_carpet_cleaning, mopping_settings, cleaning_route, segment_slow_clean_route, pet_furniture, task_type, auto_rename_segment, clean_carpets_first, saved_furnitures, new_furnitures, wetness, wetness_level, obstacles, water_check, auto_carpet_cleaning, segment_mopping_settings, max_suction_power_extended, auto_recleaning, auto_rewashing, new_state, camera_streaming, gen5, detergent, custom_cleaning_mode, cruising, map
device_class: dreame_vacuum
icon: mdi:sleep
friendly_name: L20 Ultra Complete
supported_features: 15356

[PiotrMachowski]

Which integration do you use? You can add any entity/attribute to tiles. Camera should work normally out of the box

[jimjaeger]

Hi, thanks for the fast response. I use Tasshack/dreame-vacuum (v2.0.0b15) to get Dreame L20 Ultra support. Camera stream I did not see but I guess it is not provided from the integration yet.

For curious I am how I can add translation for example for the "Sleeping" status value or mop_pad status.
In the meanwhile I found that I can override tiles and add manual tiles. I hope we could add some support in the out card.
I would be happy to add the translation value and may some additional entity attributes via pull request if such enhancements are accepted.

[PiotrMachowski]

Oh, you meant an actual camera. Yes, it has to be provided by the integration.

You can provide translations using translations config:

tiles:
  - entity: sun.sun
    translations:
      "below horizon": Night
      "above horizon": Day

Yes, PRs are welcome, but it might take me some time to merge them

---

Please respond in the same thread

[jimjaeger]

Hi, Thanks for the response.

I provided the mentioned enhancements with #743
but get an error "Error: <Plugin jimjaeger/lovelace-xiaomi-vacuum-map-card> Repository structure for dev is not compliant".
I am not sure if it come from my changes or not. Is it something I can fix in my PR?

[PiotrMachowski]

Thanks! Do not worry about failed hacs build 😉