Getting started on Windws 10 #6
Replies: 11 comments 10 replies
-
|
Hi, can you describe your questions in detail? |
Beta Was this translation helpful? Give feedback.
-
|
Sorry if i write in italian, hope you can translate. Ho scaricato la
versione di observer per windows amd64. Uso il Windows 10, ma non sono
stato in grado di avviare il programma. Ho cercato di seguire le
istruzioni ma non ci sono riuscito. Purtroppo non sono molto esperto e
volevo valutare questo software anche perche' sono interessato al vostro
progetto per i geofoni. Forse il problema è su un database sul. Comunque
avviando il file .exe vedo solo comparire velocemente una finestra che poi
si richiede. Non so se e' possibile avere istruzioni piu' dettagliate.
Grazie
Il Mer 7 Mag 2025, 06:17 ttyAMA0 ***@***.***> ha scritto:
… Hi, can you describe your questions in detail?
—
Reply to this email directly, view it on GitHub
<#6 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6D6WDRZBMJZEBFKPHD25F3K5AVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBVG44TGNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi there, Thank you for your interest in our project, the AnyShake Observer is a cross-platform, browser-based (B/S architecture) application, which means its main interface runs in a web browser rather than as a traditional desktop program. To get started, please follow these steps:
Please note that you will need a configuration file ( Please also note that our crowdfunding campaign is still in the pre-release stage, so I assume you may not have the necessary hardware (AnyShake Explorer) yet. However, we plan to set up a public demo site for testing, which will allow you to evaluate the software without hardware. I will keep you updated on this. |
Beta Was this translation helpful? Give feedback.
-
|
grazie per la cortese risposta, ho inserito i dati nel file config ma ho
questo errore:
2025-05-07 18:45:25.818←[31m [FATA] [module:main] ←[0mKey:
'Config.NtpClient.Port' Error:Field validation for 'Port' failed on the
'min' tag
Key: 'Config.Server.Port' Error:Field validation for 'Port' failed on the
'min' tag
Key: 'Config.Logger.Level' Error:Field validation for 'Level' failed on the
'oneof' tag
ecco il ,mio config:
{
"location": {
"latitude": 38.1783,
"longitude": 20.4878,
"elevation": 50
},
"hardware": {
"endpoint": "serial://COM12?baudrate=57600",
"protocol": "v3",
"model": "THER",
"timeout": 5
},
"database": {
"endpoint": "sqlite://",
"username": "",
"password": "",
"database": "",
"prefix": "as_",
"timeout": 5
},
"ntpclient": {
"endpoint": "ntp://pool.ntp.org:123",
"timeout": 5,
"retry": 5
},
"server": {
"listen": "0.0.0.0:8073",
"debug": false,
"cors": true
},
"logger": {
"level": "info",
"rotation": 5,
"lifecycle": 3,
"size": 0,
"path": "./logs/observer.log"
}
}
Il giorno mer 7 mag 2025 alle ore 11:24 ttyAMA0 ***@***.***>
ha scritto:
… Hi there,
Thank you for your interest in our project, the AnyShake Observer is a
cross-platform, browser-based (B/S architecture) application, which means
its main interface runs in a web browser rather than as a traditional
desktop program. To get started, please follow these steps:
1. Open the Windows command prompt and run the Observer executable.
For example (on Windows 10):
/path/to/observer.exe -config /path/to/your/config.json
2. Access the Web Interface: Once the program is running, you can
access the main interface by opening your web browser and visiting
http://<your_ip>:8073.
*Please note that you will need a configuration file (config.json) to tell
the Observer how to connect to your Explorer hardware.* We provide a
visual configuration generator on anyshake.github.io/prisma to make this
process easier. Simply fill out the form, download the generated
config.json, and place it in the appropriate directory.
*Please also note that our crowdfunding campaign is still in the
pre-release stage, so I assume you may not have the necessary hardware
(AnyShake Explorer) yet.* However, we plan to set up a public demo site
for testing, which will allow you to evaluate the software without
hardware. I will keep you updated on this.
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6GDNL22YTWRF4MQ3HL25G7MLAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBWGAZTIOI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Try this release instead: https://github.com/anyshake/observer/releases/tag/v4.0.0 |
Beta Was this translation helpful? Give feedback.
-
|
perfetto grazie, ora non ho più questo errore, anche sul database ho molti
dubbi su cosa dovessi fare, quale download devo fare? e cos'e' e dove trovo
l'observer.db. siete davvero molto disponibili e mi scuso per le mie scarse
conoscenze.Grazie
Il giorno mer 7 mag 2025 alle ore 19:58 ttyAMA0 ***@***.***>
ha scritto:
… Try this release instead:
https://github.com/anyshake/observer/releases/tag/v4.0.0
BTW, you need specify the path of SQLite database file in
database.database field, e.g. ./observer.db
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6F3UOACRV3QVU7M5ET25I3R7AVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBWGU4TEMQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
You don't need to download anything additional files, the file path you specified ( |
Beta Was this translation helpful? Give feedback.
-
|
scusa ma ho ancora un problema: 2025-05-08 00:08:46.533←[36m [INFO]
[module:main] ←[0mglobal configuration has been loaded
2025-05-08 00:08:46.533←[36m [INFO] [module:main] ←[0mlogs will be saved
to: E:/observer_amd64/logs/observer.log
2025-05-08 00:08:46.534←[36m [INFO] [module:main] ←[0mquerying NTP server
at ntp://pool.ntp.org:123
2025-05-08 00:08:46.575←[36m [INFO] [module:main] ←[0mapplication time has
been synced with NTP server
2025-05-08 00:08:46.576←[36m [INFO] [module:main] ←[0mcurrent network time
in UTC timezone: 2025-05-07T21:08:46Z
2025-05-08 00:08:46.578←[31m [FATA] [module:main] ←[0mfailed to open
database: unable to open database file: out of memory (14)
Il giorno mer 7 mag 2025 alle ore 20:25 ttyAMA0 ***@***.***>
ha scritto:
… You don't need to download anything additional files, the file path you
specified (./observer.db) will be automatically created if it does not
exist.
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6C5CWXUT2ITGNG67L325I6XTAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBWGYYTKNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Based on the information you provided, I cannot reproduce your problem on Windows 10. You can consider using a database such as MySQL instead of SQLite. |
Beta Was this translation helpful? Give feedback.
-
|
mI spiace, ma anche con Mysql ho un errore:
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mglobal configuration
has been loaded
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mlogs will be saved
to: E:/observer_amd64/logs/observer.log
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mquerying NTP server
at ntp://pool.ntp.org:123
2025-05-08 09:28:30.796←[36m [INFO] [module:main] ←[0mapplication time has
been synced with NTP server
2025-05-08 09:28:30.797←[36m [INFO] [module:main] ←[0mcurrent network time
in UTC timezone: 2025-05-08T06:28:30Z
2025-05-08 09:28:30.797←[31m [FATA] [module:main] ←[0mfailed to open
database: invalid DSN: did you forget to escape a param value?
Il giorno gio 8 mag 2025 alle ore 05:32 ttyAMA0 ***@***.***>
ha scritto:
… Based on the information you provided, I cannot reproduce your problem on
Windows 10. You can consider using a database such as MySQL instead of
SQLite.
IMG_20250508_103025_167.jpg (view on web)
<https://github.com/user-attachments/assets/a2451893-3ba6-4b6a-a32f-99d4c663c93c>
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6GBBQWSIDZ3GJQLPUT25K645AVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXGAYTKNA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
The error "invalid DSN" means your And don't forget to create the database |
Beta Was this translation helpful? Give feedback.
-
|
ho provato anche con mssql ma ho questo errore: 25-05-08 11:29:37.392←[36m
[INFO] [module:main] ←[0mglobal configuration has been loaded
2025-05-08 11:29:37.392←[36m [INFO] [module:main] ←[0mlogs will be saved
to: E:/observer_log/logs/observer.log
2025-05-08 11:29:37.395←[36m [INFO] [module:main] ←[0mquerying NTP server
at ntp://pool.ntp.org:123
2025-05-08 11:29:37.432←[36m [INFO] [module:main] ←[0mapplication time has
been synced with NTP server
2025-05-08 11:29:37.433←[36m [INFO] [module:main] ←[0mcurrent network time
in UTC timezone: 2025-05-08T08:29:37Z
2025-05-08 11:29:37.438←[31m [FATA] [module:main] ←[0mfailed to open
database: unable to open tcp connection with host 'localhost:1433': dial
tcp 127.0.0.1:1433: connectex: Impossibile stabilire la connessione.
Rifiuto persistente del computer di destinazione.
Il giorno gio 8 mag 2025 alle ore 09:29 franco tedeschi <
***@***.***> ha scritto:
… mI spiace, ma anche con Mysql ho un errore:
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mglobal configuration
has been loaded
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mlogs will be saved
to: E:/observer_amd64/logs/observer.log
2025-05-08 09:28:30.635←[36m [INFO] [module:main] ←[0mquerying NTP server
at ntp://pool.ntp.org:123
2025-05-08 09:28:30.796←[36m [INFO] [module:main] ←[0mapplication time has
been synced with NTP server
2025-05-08 09:28:30.797←[36m [INFO] [module:main] ←[0mcurrent network time
in UTC timezone: 2025-05-08T06:28:30Z
2025-05-08 09:28:30.797←[31m [FATA] [module:main] ←[0mfailed to open
database: invalid DSN: did you forget to escape a param value?
Il giorno gio 8 mag 2025 alle ore 05:32 ttyAMA0 ***@***.***>
ha scritto:
> Based on the information you provided, I cannot reproduce your problem on
> Windows 10. You can consider using a database such as MySQL instead of
> SQLite.
> IMG_20250508_103025_167.jpg (view on web)
> <https://github.com/user-attachments/assets/a2451893-3ba6-4b6a-a32f-99d4c663c93c>
>
> —
> Reply to this email directly, view it on GitHub
> <#6 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BO6PI6GBBQWSIDZ3GJQLPUT25K645AVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXGAYTKNA>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
|
Check out https://stackoverflow.com/a/33590981 and this may help. |
Beta Was this translation helpful? Give feedback.
-
|
Scusa, ma purtroppo oo non ho mai lavorato con myqsl e non so se e' un
programma che devo scaricare ne' come si configurazione un database.
Provero' a chiedere a copilot come configurarlo, altrimenti lasciero'
perdere. Grazie per il tempo che mi hai dedicato
Il Gio 8 Mag 2025, 12:51 ttyAMA0 ***@***.***> ha scritto:
… Check out https://stackoverflow.com/a/33590981 and this may help.
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6D4G5W7TZQJZWYILHD25MSKDAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXGMZTKOA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
We have just completed a round of refactoring, so the documentation is still lacking. Next, we will further supplement the getting started documentation to simplify the difficulty for users to get started, I will continue to follow up on this discussion. |
Beta Was this translation helpful? Give feedback.
-
|
To install MySQL on Windows 10, you can refer to https://www.dataquest.io/blog/install-mysql-windows/ |
Beta Was this translation helpful? Give feedback.
-
|
ora ho installato sqllite, ma devo isntallare anche un server seedlink?
pensavo che questo fosse programma per vedere i dati di un sensore dalla
porta seriale
025-05-08 16:42:50.330←[36m [INFO] [module:main] ←[0mglobal configuration
has been loaded
2025-05-08 16:42:50.330←[36m [INFO] [module:main] ←[0mlogs will be saved
to: E:/observer_log/logs/observer.log
2025-05-08 16:42:50.330←[36m [INFO] [module:main] ←[0mquerying NTP server
at ntp://pool.ntp.org:123
2025-05-08 16:42:50.436←[36m [INFO] [module:main] ←[0mapplication time has
been synced with NTP server
2025-05-08 16:42:50.436←[36m [INFO] [module:main] ←[0mcurrent network time
in UTC timezone: 2025-05-08T13:42:50Z
2025-05-08 16:42:50.455←[36m [INFO] [module:main] ←[0mdatabase connection
has been established
2025-05-08 16:42:51.390←[36m [INFO] [module:main] ←[0mdatabase schema has
been configured
2025-05-08 16:42:51.390←[36m [INFO] [module:startup_setup_station]
←[0mrunning startup task: startup_setup_station
2025-05-08 16:42:51.393←[36m [INFO] [module:startup_setup_admin]
←[0mrunning startup task: startup_setup_admin
2025-05-08 16:42:51.488←[33m [WARN] [module:startup_setup_admin] ←[0m
=====================================================================================
|| PLEASE CHANGE THE DEFAULT PASSWORD FOR DEFAULT USER IMMEDIATELY:
anyshake_admin ||
=====================================================================================
2025-05-08 16:42:51.491←[36m [INFO] [module:main] ←[0mharware device has
been connected
2025-05-08 16:42:51.497←[36m [INFO] [module:service_forwarder] ←[0mservice
forwarder is listening on localhost:30000
2025-05-08 16:42:51.497←[36m [INFO] [module:service_forwarder] ←[0mservice
service_forwarder has been started
2025-05-08 16:42:51.503←[36m [INFO] [module:service_helicorder] ←[0mservice
service_helicorder is disabled by configuration
2025-05-08 16:42:51.507←[36m [INFO] [module:service_miniseed] ←[0mservice
service_miniseed is disabled by configuration
2025-05-08 16:42:51.518←[36m [INFO] [module:service_quakesense] ←[0mservice
service_quakesense is disabled by configuration
2025-05-08 16:42:51.520←[36m [INFO] [module:service_seedlink] ←[0mservice
service_seedlink has been started
2025-05-08 16:42:51.521←[36m [INFO] [module:service_timesync] ←[0mservice
service_timesync has been started
2025-05-08 16:42:51.521←[36m [INFO] [module:service_seedlink] ←[0mservice
seedlink is listening on localhost:18000
2025-05-08 16:42:51.522←[36m [INFO] [module:service_watchcat] ←[0mservice
service_watchcat has been started
2025-05-08 16:42:51.526←[36m [INFO] [module:service_archiver] ←[0mservice
service_archiver has been started
2025-05-08 16:42:51.532←[36m [INFO] [module:service_metrics] ←[0mservice
service_metrics has been started
2025-05-08 16:42:51.538←[36m [INFO] [module:http_server] ←[0mstarting http
server at 0.0.0.0:8073
2025-05-08 16:42:53.529←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client connected to SeedLink service
2025-05-08 16:42:53.529←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client sent command to SeedLink service: [HELLO]
2025-05-08 16:42:53.580←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client sent command to SeedLink service: [STATION
SHAKE AS]
2025-05-08 16:42:53.631←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client sent command to SeedLink service: [SELECT
00EHE.D]
2025-05-08 16:42:53.683←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client sent command to SeedLink service: [DATA 18D1D]
2025-05-08 16:42:53.733←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54589 - client sent command to SeedLink service: [END]
2025-05-08 16:42:57.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
2025-05-08 16:43:00.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
2025-05-08 16:43:03.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
2025-05-08 16:43:06.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
2025-05-08 16:43:07.254←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client connected to SeedLink service
2025-05-08 16:43:07.254←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client sent command to SeedLink service: [HELLO]
2025-05-08 16:43:07.306←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client sent command to SeedLink service: [STATION
SHAKE AS]
2025-05-08 16:43:07.358←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client sent command to SeedLink service: [SELECT
00EHE.D]
2025-05-08 16:43:07.408←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client sent command to SeedLink service: [DATA 69B]
2025-05-08 16:43:07.460←[36m [INFO] [module:service_seedlink]
←[0m127.0.0.1:54591 - client sent command to SeedLink service: [END]
2025-05-08 16:43:09.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
2025-05-08 16:43:12.522←[33m [WARN] [module:service_watchcat] ←[0mdevice is
not responsding as expected, trying to flush device
Il giorno gio 8 mag 2025 alle ore 14:54 ttyAMA0 ***@***.***>
ha scritto:
… To install MySQL on Windows 10, you can refer to
https://www.dataquest.io/blog/install-mysql-windows/
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6GW5B6XD7KSYIQXRLD25NAYBAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXGQ2TSNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
You do not need to install a separate SeedLink server, as the AnyShake Observer already acts as one. The data stream in SeedLink is defined by the connected Explorer hardware. Since the log indicates no response from the hardware, the SeedLink client currently shows no available streams. You can access the web UI at Username: |
Beta Was this translation helpful? Give feedback.
-
|
praticamente allora senza l'hardware non e' possibile fare nulla, non ho
capito perchè vengono richiesti dei dati nel file di config come la porta
seriale o coordinate che poi non vedo ritrovo nella pagina web, che non
riesco a modificare. attendero' Appena sarete ad uno stato piu avanzato
del vostro interessante progetto cerchero' di capirne di piu' attualmente
utilzzo un sistema triassiale (geofoni) nonchè dei pendoli lehman. grazie
[image: image.png]
Il giorno gio 8 mag 2025 alle ore 17:20 ttyAMA0 ***@***.***>
ha scritto:
… You do not need to install a separate SeedLink server, as the AnyShake
Observer already acts as one.
The data stream in SeedLink is defined by the connected Explorer hardware.
Since the log indicates no response from the hardware, the SeedLink client
currently shows no available streams.
You can access the web UI at http://127.0.0.1:8073 to view functions and
customize your settings. The default username and password are:
*Username:* anyshake_admin
*Password:* ***@***.***#$
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6BKM7YDFGQF64U36KT25NR4XAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXGY4TANQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
The AnyShake Observer is the dedicated software for AnyShake Explorer, designed to work seamlessly together. However, we also plan to release Data Protocol v1 Implementation details to enable DIY enthusiasts to connect their own breadboard-based hardware in the future, providing more flexible options. If you find our project interesting, please consider subscribing and sharing our Crowd Supply page to support our mission. Thank you! |
Beta Was this translation helpful? Give feedback.
-
|
Grazie, per tutto. Se in futuro potrete provvedere anche a questa opzione
sarebbe fantastico. Io ora utilizzo l'adc24 di theremino, un ottimo adc
che usa una map memory che potrebbe essere facilmente collegabile. Ma anche
il vostro hardware mi sembra molto interessante. Ho gia' inviato lama
sottoscrizione. Buon lavoro!
Il Gio 8 Mag 2025, 18:29 ttyAMA0 ***@***.***> ha scritto:
… The NTP, Location, defined in config.json serve as fallback options. When
the Explorer device is active, it will first attempt to obtain accurate
time and coordinates from the GPS module. If this data is unavailable, it
will default to the values specified in config.json. If no hardware is
detected, the Web UI will simply omit location information.
AnyShake Observer is the dedicated software for AnyShake Explorer,
designed to work seamlessly together. However, we also plan to release *Data
Protocol v1* to enable DIY enthusiasts to connect their own
breadboard-based hardware in the future, providing more flexible options.
If you find our project interesting, please consider subscribing and
sharing our Crowd Supply page
<https://www.crowdsupply.com/senseplex/anyshake-explorer> to support our
mission. Thank you!
—
Reply to this email directly, view it on GitHub
<#6 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO6PI6BCEI52OI6SZUKGHKD25NZ4LAVCNFSM6AAAAAB4RHDHCKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBXG44DINI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Beta Was this translation helpful? Give feedback.
All reactions