This repository was archived by the owner on Oct 15, 2025. It is now read-only.
Releases: imagegenius/docker-zigbee2mqtt
Releases · imagegenius/docker-zigbee2mqtt
2.2.1-ig131
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix various issues introduced in 2.2.0.
- For bare metal installations (not when using Docker or HA addon): it is recommended to update your NodeJS version to 22 (otherwise you might experience #26937)
Fixes
- #26947 Fix issue with some settings when migrating from 1.x.x to 2.2.x (@Nerivec)
- #26988 Fix settings being overwriting when env var is set to a ref (@Koenkk)
- #9116 Fixed pairing of Livolo TI0001 switches (@flaterichd)
- #9115 Tuya ZY-M100-S_2: fix presence and illuminance (@Jernau)
- #9110 Configure reporting for various Sunricher devices (@niracler)
- #26939 Fix LiXee devices causing
mqtt disconnected due to malformed(@Koenkk) - #9109 LiXee: fix
kwhPrecision is not definederror (@Koenkk) - #9111 Tuya TS0002_limited: support countdown (@mrmaximas)
- #9103 Fix GL-C-007-2ID not being detected correctly (@Xyaren)
Frontend
- 7e72b00 Fix offline showing when availability is not enabled (@Koenkk)
- 403ffac Improve typing & icons (@Nerivec)
New supported devices
This release adds support for 3 devices:
- #25053
ZG-101Z/DTuya Smart knob (@Koenkk) - #9107
S4SW-001P8EUShelly 1PM Mini Gen 4 (@marce14-git) - #9107
S4SW-001P16EUShelly 1PM Gen 4 (@marce14-git)
Fixed device detections
Contributors
dmarszk, flaterichd, and 7 other contributors
Assets 2
2.2.1-ig130
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix various issues introduced in 2.2.0.
- For bare metal installations (not when using Docker or HA addon): it is recommended to update your NodeJS version to 22 (otherwise you might experience #26937)
Fixes
- #26947 Fix issue with some settings when migrating from 1.x.x to 2.2.x (@Nerivec)
- #26988 Fix settings being overwriting when env var is set to a ref (@Koenkk)
- #9116 Fixed pairing of Livolo TI0001 switches (@flaterichd)
- #9115 Tuya ZY-M100-S_2: fix presence and illuminance (@Jernau)
- #9110 Configure reporting for various Sunricher devices (@niracler)
- #26939 Fix LiXee devices causing
mqtt disconnected due to malformed(@Koenkk) - #9109 LiXee: fix
kwhPrecision is not definederror (@Koenkk) - #9111 Tuya TS0002_limited: support countdown (@mrmaximas)
- #9103 Fix GL-C-007-2ID not being detected correctly (@Xyaren)
Frontend
- 7e72b00 Fix offline showing when availability is not enabled (@Koenkk)
- 403ffac Improve typing & icons (@Nerivec)
New supported devices
This release adds support for 3 devices:
- #25053
ZG-101Z/DTuya Smart knob (@Koenkk) - #9107
S4SW-001P8EUShelly 1PM Mini Gen 4 (@marce14-git) - #9107
S4SW-001P16EUShelly 1PM Gen 4 (@marce14-git)
Fixed device detections
Contributors
dmarszk, flaterichd, and 7 other contributors
Assets 2
2.2.0-ig129
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- Due to #26653 settings configured via environment variables are now written to the
configuration.yaml - For Z-Stack users: a new firmware is available for testing 20250321
Features
- #26608 Onboarding (docs) (@Nerivec)
- #26742 Support ZigBee on Host adapter (@Nerivec)
- #26522 Use dynamic import for external JS (@Nerivec)
- #26805 Frontend: support filtering notifications (@sarthurdev)
Improvements
- #26791 Tuya TS110E_1gang_2: expose countdown (@Koenkk)
- #724 Aqara FP1E: support OTA (@Koenkk)
- #9020 Generate definition for unsupported Green Power devices (@Nerivec)
- #9036 Innr AE 270 T: expose power on behavior (@mervync)
- #9018 Onesti easyCodeTouch_v1: expose lastest pincode save time (@los7702)
- #8907 Cando C203: improve support (@candeodevelopment)
- #8992 Tuya TRV602Z: support more features (@sdbldn)
- #8975 Niko 552-72201: add led enable & led state (@Bwko)
- #8970 Samotech SM309-S SM308-S: add external switch type (@niracler)
- #8940 Add external switch type extension to Samotech devices and move Sunricher extend functions to a unified module (@niracler)
- #711 SONOFF SNZB-02D: support OTA (@Koenkk)
- #8837 SONOFF TRVZB: support
temperature_accuracy(@lcheng33775823) - #1308 Initial support for ZigBee on Host adapter (@Nerivec)
- #1333 Add util to discover all serial/mDNS devices (@Nerivec)
Fixes
- #26867 Add device name to no converter available error message (@clockbrain)
- #26631 Check if new commits are available in update.sh (@DragonWork)
- #26707 Fix bridge offline message format for frontend (@bluemoehre)
- #26595 General cleanup (@Nerivec)
- #26769 Home Assistant: fix electrical measurements sensors category (@kad)
- #26456 Implement systemd-notify directly (@srett)
- #26735 Use dynamic import for optional extensions (@Nerivec)
- #26653 Write
ZIGBEE2MQTT_CONFIG_*envs to yaml as overrides (@Nerivec) - #9102 PTM216Z: fix action value (@chris-1243)
- #9099 Paulmann 501.34: fix action values #9075 (@mkpfalz)
- #9098 Philips Hue Wall Switch 929003017102: re-add brightness actions (@marazmarci)
- #9095 Schneider S520567: expose tilt (@jerome-pouiller)
- #9091 Tuya TYZGTH1CH-D1RF: auto settings (@Koenkk)
- #9086 Tuya TS011F_with_threshold: enable onOffCountdown (@petrkalos)
- #9074 Fix the issue of incorrectly identifying powerFactor Phase B/Phase C (@script0803)
- #9064 NEO NAS-PS10B2: fix
lux_value(@ivankravets) - #9072 Sonoff TRVZB: fix rounding of externalTemperatureInput (@marazmarci)
- #9055 EFEKTA: various fixes (@smartboxchannel)
- #9061 Fix soil electrical conductivity unit is µS/cm (microsiemens per centimetre) (@pdecat)
- #9062 Namron 4512788: disable effects and enable configuring reporting (@kyrias)
- #9051 Battery for Yandex wireless switch (@kirovilya)
- #9046 Generate definition when candidates present but no match found (@Nerivec)
- #9047 Gledopto GL-C-009P: configure reporting (@chiva)
- #9052 Tuya TS110E_2gang_2: expose light type and power on behaviour for l2 (@FPSUsername)
- #9040 MAZDA TR-M2Z: improve system mode and presets (@Nopraz)
- #9041 Rename some Tongou devices (@LordRoge)
- #9042 Third Reality 3RSMR01067Z: expose voltage and battery low (@3reality-support)
- #9032 Add SR-ZG2833PAC to PTM 215Z whiteLabel (@niracler)
- #9021 Busch-Jaeger 6735/6736/6737: various improvements and fixes (@klada)
- #9033 Candeo C204, C-ZB-DM204, C205 & C-ZB-SM205-2G: various improvements (@candeodevelopment)
- #9003 Generated source for Koenkk/zigbee2mqtt#26522 (@Nerivec)
- #9039 Gledopto GL-SD-301P: expose power on behavior (@Furax007)
- #9035 Namron 3802966: fix color temperature range (@Eising)
- #9010 Fixes for PST POW v2 and PST POW DUO v2 (@smartboxchannel)
- #8925 Third Reality 3RSMR01067Z: expose
occupancy(@3reality-support) - #9014 Tuya 2CT: expose
power(@Wrathitr) - #9013 Tuya TS0726_4_gang_switch_and_2_scene: support backlight (@hyteplus)
- #8999 Home Assistant: e power, current and voltage as normal sensor data (@kad)
- #26659 Moes UFO-R11: fix
Exception while calling fromZigbee converter(@Koenkk) - #9002 Tuya TS0601_thermostat_3: expose
pi_heating_demand(@sesse) - #8965 Add
lowStatusReportingConfigtobatterymodernExtend (@kirovilya) - #8987 Convert more of NodOn to modern extend (@sjorge)
- #8977 Disable
producedEnergyforgasMetermodernExtend (@IgnacioHR) - #8984 Orvibo: fix random on/off and expose
power_on_behavior(@vilaemail) - #8982 Sonoff ZBMINIR2: add config entity category to selected exposed options (@TomaszLizer)
- #8943 Add label to modern extends binary function (@canardos)
- #8955 EFEKTA: various fixes (@smartboxchannel)
- #8957 Fix duplicate options and toZigbee converters (@Koenkk)
- #8942 Re-add on_time and off_wait_time to the light_onoff_brightness converter (@marazmarci)
- #8909 ShinaSystem: use metering cluster for power measurements (@shinasys)
- #8962 Tuya TS0012_switch_module and TS0013_switch_module: support countdown (@mrmaximas)
- #8952 Tuya ZWT198/ZWT100-BH: preset inverted (@Nopraz)
- #8931 Biome improvements (@Koenkk)
- [#26599](https://gith...
Contributors
Reen, Eising, and 87 other contributors
Assets 2
2.1.3-ig128
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix issues with the Home Assistant lights discovery (e.g. #26557, zigbee2mqtt/hassio-zigbee2mqtt#736, Koenkk/zigbee2mqtt#26562)
Fixes
Contributors
Koenkk
Assets 2
2.1.3-ig127
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix issues with the Home Assistant lights discovery (e.g. #26557, zigbee2mqtt/hassio-zigbee2mqtt#736, Koenkk/zigbee2mqtt#26562)
Fixes
Contributors
Koenkk
Assets 2
2.1.3-ig126
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix issues with the Home Assistant lights discovery (e.g. #26557, zigbee2mqtt/hassio-zigbee2mqtt#736, Koenkk/zigbee2mqtt#26562)
Fixes
Contributors
Koenkk
Assets 2
2.1.3-ig125
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release to fix issues with the Home Assistant lights discovery (e.g. #26557, zigbee2mqtt/hassio-zigbee2mqtt#736, Koenkk/zigbee2mqtt#26562)
Fixes
Contributors
Koenkk
Assets 2
2.1.1-ig124
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release primarily aimed at resolving problems with several Tuya devices not updating (e.g. Koenkk/zigbee2mqtt#26168, Koenkk/zigbee2mqtt#26124, Koenkk/zigbee2mqtt#26180)
Improvements
- #8701 Add Orvibo MixSwitch zigbee models (@vilaemail)
- #8727 Add support for light_brightness_move and light_brightness step to Inovelli switches (@rohankapoorcom)
- #26163 Support power on behaviour for LEDVANCE 4058075729322 (@Koenkk)
- #8714 Add energy to AVATTO ZWPM16 (@oli-z)
- #8703 Improve integration of various Enbrighten devices (@mccordscvs)
- #8700 Improvements for Inovelli devices (@rohankapoorcom)
- #8705 Yokis : updating device definition (@LaurentChardin)
Fixes
- #26114 Rename
internal_temperaturetointernalTemperatureto correct typo (@rohankapoorcom) - #8749 Enable OTA for newer Hue Motion Sensors (@mundschenk-at)
- #8752 Improve battery report PO-THCO-EAU (@gbrunois)
- #8740 Add
ZG2819S-RGBWas whitelabel of511.344(@chris-1243) - #8743 Change ZG9030A-MW occupancy to endpoint 2 and change some category to config (@niracler)
- #26158 Fix 501.39 detection (@Koenkk)
- #8748 Fix LiXee integration (@Koenkk)
- #8746 PTVO converters: added rounding for pressure, humidity, illuminance (@ptvoinfo)
- #8715 Adapt SP 24x converter for new firmware version (@mundschenk-at)
- #8724 Added type for LightArgs.levelConfig (@mccordscvs)
- #8719 Disable
power_on_behaviourfor Schneider Electric MEG5126-0300 (@senna1992) - #8733 Fix CO2 values #26108 (@kirovilya)
- #25964 Fix Namron 4512768 power measurements (@Koenkk)
- #8723 Prevent Tuya packets from being reprocessed by checking entire packet instead of
seqonly (@jpbede) - #8736 Revert "Invert direction for Smartwings shades" (@Koenkk)
- #8730 Tuya BAC-003: Add optional device state property as per issue request (@robvanoostenrijk)
- #8731 Tuya BAC-006: publishDuplicateTransaction, optional heating, optional device state (@robvanoostenrijk)
- #26108 Fix CO2 values (@Koenkk)
- #8709 Fix enum mapping for Namron Edge Thermostat (@bskjon)
- #21924 Remove unsupported tilt from Tuya TS0301 (@Koenkk)
New supported devices
This release adds support for 8 devices:
- #8754
SLZB-06Mg24SMLIGHT Router (@Nerivec) - #8745
7963223Viessmann ViCare climate sensor (@JohnConnett) - #8726
EFEKTA_Air_Quality_StationEFEKTA Air quality station (@smartboxchannel) - #8729
PO-THCO-EAUPowernity Thermostat radiator valve (@gbrunois) - #8732
Yali Parada PlusPurmo/Radson Electric oil-filled radiator (@sdebruyn) - #8704
FB56-DOS06HM1.1Feibit 3A / Nue Zigbee door sensor (@robertpascale) - #26070
81813-V2AduroSmart BR30 light bulb (@Koenkk) - #8716
ZWPM16-2AVATTO Zigbee smart energy meter 80A/2CH (@SapozhnikUA)
Fixed device detections
Contributors
LaurentChardin, sdebruyn, and 21 other contributors
Assets 2
2.1.1-ig123
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release primarily aimed at resolving problems with several Tuya devices not updating (e.g. Koenkk/zigbee2mqtt#26168, Koenkk/zigbee2mqtt#26124, Koenkk/zigbee2mqtt#26180)
Improvements
- #8701 Add Orvibo MixSwitch zigbee models (@vilaemail)
- #8727 Add support for light_brightness_move and light_brightness step to Inovelli switches (@rohankapoorcom)
- #26163 Support power on behaviour for LEDVANCE 4058075729322 (@Koenkk)
- #8714 Add energy to AVATTO ZWPM16 (@oli-z)
- #8703 Improve integration of various Enbrighten devices (@mccordscvs)
- #8700 Improvements for Inovelli devices (@rohankapoorcom)
- #8705 Yokis : updating device definition (@LaurentChardin)
Fixes
- #26114 Rename
internal_temperaturetointernalTemperatureto correct typo (@rohankapoorcom) - #8749 Enable OTA for newer Hue Motion Sensors (@mundschenk-at)
- #8752 Improve battery report PO-THCO-EAU (@gbrunois)
- #8740 Add
ZG2819S-RGBWas whitelabel of511.344(@chris-1243) - #8743 Change ZG9030A-MW occupancy to endpoint 2 and change some category to config (@niracler)
- #26158 Fix 501.39 detection (@Koenkk)
- #8748 Fix LiXee integration (@Koenkk)
- #8746 PTVO converters: added rounding for pressure, humidity, illuminance (@ptvoinfo)
- #8715 Adapt SP 24x converter for new firmware version (@mundschenk-at)
- #8724 Added type for LightArgs.levelConfig (@mccordscvs)
- #8719 Disable
power_on_behaviourfor Schneider Electric MEG5126-0300 (@senna1992) - #8733 Fix CO2 values #26108 (@kirovilya)
- #25964 Fix Namron 4512768 power measurements (@Koenkk)
- #8723 Prevent Tuya packets from being reprocessed by checking entire packet instead of
seqonly (@jpbede) - #8736 Revert "Invert direction for Smartwings shades" (@Koenkk)
- #8730 Tuya BAC-003: Add optional device state property as per issue request (@robvanoostenrijk)
- #8731 Tuya BAC-006: publishDuplicateTransaction, optional heating, optional device state (@robvanoostenrijk)
- #26108 Fix CO2 values (@Koenkk)
- #8709 Fix enum mapping for Namron Edge Thermostat (@bskjon)
- #21924 Remove unsupported tilt from Tuya TS0301 (@Koenkk)
New supported devices
This release adds support for 8 devices:
- #8754
SLZB-06Mg24SMLIGHT Router (@Nerivec) - #8745
7963223Viessmann ViCare climate sensor (@JohnConnett) - #8726
EFEKTA_Air_Quality_StationEFEKTA Air quality station (@smartboxchannel) - #8729
PO-THCO-EAUPowernity Thermostat radiator valve (@gbrunois) - #8732
Yali Parada PlusPurmo/Radson Electric oil-filled radiator (@sdebruyn) - #8704
FB56-DOS06HM1.1Feibit 3A / Nue Zigbee door sensor (@robertpascale) - #26070
81813-V2AduroSmart BR30 light bulb (@Koenkk) - #8716
ZWPM16-2AVATTO Zigbee smart energy meter 80A/2CH (@SapozhnikUA)
Fixed device detections
Contributors
LaurentChardin, sdebruyn, and 21 other contributors
Assets 2
2.1.1-ig122
ImageGenius Changes:
rebase to alpine 3.19
zigbee2mqtt Changes:
Notes
- This is a hot-fix release primarily aimed at resolving problems with several Tuya devices not updating (e.g. Koenkk/zigbee2mqtt#26168, Koenkk/zigbee2mqtt#26124, Koenkk/zigbee2mqtt#26180)
Improvements
- #8701 Add Orvibo MixSwitch zigbee models (@vilaemail)
- #8727 Add support for light_brightness_move and light_brightness step to Inovelli switches (@rohankapoorcom)
- #26163 Support power on behaviour for LEDVANCE 4058075729322 (@Koenkk)
- #8714 Add energy to AVATTO ZWPM16 (@oli-z)
- #8703 Improve integration of various Enbrighten devices (@mccordscvs)
- #8700 Improvements for Inovelli devices (@rohankapoorcom)
- #8705 Yokis : updating device definition (@LaurentChardin)
Fixes
- #26114 Rename
internal_temperaturetointernalTemperatureto correct typo (@rohankapoorcom) - #8749 Enable OTA for newer Hue Motion Sensors (@mundschenk-at)
- #8752 Improve battery report PO-THCO-EAU (@gbrunois)
- #8740 Add
ZG2819S-RGBWas whitelabel of511.344(@chris-1243) - #8743 Change ZG9030A-MW occupancy to endpoint 2 and change some category to config (@niracler)
- #26158 Fix 501.39 detection (@Koenkk)
- #8748 Fix LiXee integration (@Koenkk)
- #8746 PTVO converters: added rounding for pressure, humidity, illuminance (@ptvoinfo)
- #8715 Adapt SP 24x converter for new firmware version (@mundschenk-at)
- #8724 Added type for LightArgs.levelConfig (@mccordscvs)
- #8719 Disable
power_on_behaviourfor Schneider Electric MEG5126-0300 (@senna1992) - #8733 Fix CO2 values #26108 (@kirovilya)
- #25964 Fix Namron 4512768 power measurements (@Koenkk)
- #8723 Prevent Tuya packets from being reprocessed by checking entire packet instead of
seqonly (@jpbede) - #8736 Revert "Invert direction for Smartwings shades" (@Koenkk)
- #8730 Tuya BAC-003: Add optional device state property as per issue request (@robvanoostenrijk)
- #8731 Tuya BAC-006: publishDuplicateTransaction, optional heating, optional device state (@robvanoostenrijk)
- #26108 Fix CO2 values (@Koenkk)
- #8709 Fix enum mapping for Namron Edge Thermostat (@bskjon)
- #21924 Remove unsupported tilt from Tuya TS0301 (@Koenkk)
New supported devices
This release adds support for 8 devices:
- #8754
SLZB-06Mg24SMLIGHT Router (@Nerivec) - #8745
7963223Viessmann ViCare climate sensor (@JohnConnett) - #8726
EFEKTA_Air_Quality_StationEFEKTA Air quality station (@smartboxchannel) - #8729
PO-THCO-EAUPowernity Thermostat radiator valve (@gbrunois) - #8732
Yali Parada PlusPurmo/Radson Electric oil-filled radiator (@sdebruyn) - #8704
FB56-DOS06HM1.1Feibit 3A / Nue Zigbee door sensor (@robertpascale) - #26070
81813-V2AduroSmart BR30 light bulb (@Koenkk) - #8716
ZWPM16-2AVATTO Zigbee smart energy meter 80A/2CH (@SapozhnikUA)
Fixed device detections
Contributors
LaurentChardin, sdebruyn, and 21 other contributors