How rnodeconf --autoinstall waveshare SX126x LoRa HAT

[zhanglazhuan]

I use respberry pi and waveshare SX1268 LoRa HAT 433M，but when I rnodeconf --autoinstall, error occurred, the log is:

---

                           Installer Ready

Ok, that should be all the information we need. Please confirm the following
summary before proceeding. In the next step, the device will be flashed and
provisioned, so make sure that you are satisfied with your choices.

Serial port : /dev/ttyAMA0
Device type : Hombrew RNode (Band capabilities unknown)
Platform : ESP32
Device MCU : Espressif Systems ESP32
Firmware file : rnode_firmware_esp32_generic.zip

---

Is the above correct? [y/N] y
[00:28:23] Checking firmware file availability...
[00:28:23] Retrieving latest version info from https://unsigned.io/firmware/latest/?v=2.4.0&variant=rnode_firmware_esp32_generic.zip
[00:28:24] The selected firmware for this board is version 1.83
[00:28:24] Using existing firmware file: rnode_firmware_esp32_generic.zip for version 1.83
[00:28:24] Verifying firmware integrity...
[00:28:25] Decompressing firmware...
[00:28:25] Firmware decompressed
[00:28:25] Flashing RNode firmware to device on /dev/ttyAMA0
esptool.py v3.3.3
Serial port /dev/ttyAMA0
Connecting......................................

A fatal error occurred: Failed to connect to ESP32: No serial data received.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
[00:28:33] Error from flasher (2) while writing.
[00:28:33] Some boards have trouble flashing at high speeds, and you can
[00:28:33] try flashing with a lower baud rate, as in this example:
[00:28:33] rnodeconf --autoinstall --baud-flash 115200

=============
my device is right

zhanglazhuan@pi:~ $ ls -l /dev/serial*
lrwxrwxrwx 1 root root 7 Sep 25 22:54 /dev/serial0 -> ttyAMA0

[cobraPA]

RNode firmware is not supported for the waveshare hat.