[boschshc] Support for Light/Shutter Control II

[mike-bike]

Hi,

I just purchased 2 Bosch Light/Shutter Control II devices (https://www.bosch-smarthome.com/uk/en/products/devices/light-control/). Based on configuration they behave like a shutter control or 2 wall switches. I have tried to add them as switches to OpenHAB but unfortunately they don't work. Neither switch states nor power consumption are recognized. Looking at the log, they are reporting different services than switches:

Found device: name=Brunnen id=hdm:ZigBee:xyz
.... service: PowerSwitch
.... service: ChildProtection
.... service: PowerSwitchProgram

Are there any concrete plans enhancing the functionality of the binding?

Many thanks for your great effort and support.

Regards,
Michael

Your Environment

openhabian on RPi4, HUE, Bosch Smart Home Controller

[openhab-bot]

This issue has been mentioned on openHAB Community. There might be relevant details there:

https://community.openhab.org/t/problem-connection-bosch-smarthome-light-shutter-control-unit-ii/146281/2

[david-pace]

This was also requested by @wwinandy in #16203.

I can implement support for the Light/Shutter Control II, but as I don't own this specific device myself I would need your help to test it. This would involve downloading JARs, installing JARs via the openHAB console, and testing the new thing and its channels. This can potentially make the binding unusable temporarily, but everything should be revertable to the original state. A backup would be in order anyway just in case. @mike-bike already offered to help us testing, which is great ❤️

If you guys need support for other devices, please create separate Github enhancement requests for each device. Thank you 👍

[mike-bike]

Hi @david-pace, let me know where to download a test version of the JAR and I am happy to test. I could offer:

• Door Contact II (installed) - dev in progress
• Light/Shutter Control II configured as double Light Switch (installed)
• Light/Shutter Control II configured as Roller Shutter (need to grab screw driver to install device)
• Dimmer (sitting in the box waiting for screw driver) - request #16241 raised

Cheers

[mike-bike]

Hi @david-pace, let me know where to download a test version of the JAR and I am happy to test. I could offer:

• Door Contact II (installed)
• Light/Shutter Control II configured as double Light Switch (installed)
• Light/Shutter Control II configured as Roller Shutter (need to grab screw driver to install device)
• Dimmer (sitting in the box waiting for screw driver)

Cheers

[mike-bike]

Hi @david-pace, let me know where to download a test version of the JAR and I am happy to test. I could offer:

• Door Contact II (installed)
• Light/Shutter Control II configured as double Light Switch (installed)
• Light/Shutter Control II configured as Roller Shutter (need to grab screw driver to install device)
• Dimmer (sitting in the box waiting for screw driver)

Cheers

[wwinandy]

Hi @david-pace, where can i get the test JARs for testing?
Is there any instruction for installing the JARs?

I also use a smoke alarm II - request ( #16243)
and a Universal Switch II - request (#16244)

Regards

[david-pace]

Hi, I first have to implement the necessary services and devices before I can provide JARs. Once I have a first version I will also provide instructions how to install the JARs. I hope I will find some free time soon and that it won't be too long but I can't promise anything.

Thank you in advance for volunteering to help with the testing, this already motivates me to start coding because without your help this would not be possible 👍

[david-pace]

Hi @mike-bike, I need some information regarding the device IDs. The Light/Shutter Control II works with so called child devices. I think there should be one main device and two child devices. The child device IDs should contain # or %23.

Could you please check whether you see the main device and the child device IDs in the listing when openHAB is started? If so, can you please post them here or send them via email? I need the main device ID, both child device IDs and the associated services. Thank you 🙂

[mike-bike]

Hi Davi, I have extracted the info from the log file after a restart with your snapshot binding: openhab> list | grep Bosch 250 │ Active │ 80 │ 4.2.0.202401032334 │ openHAB Add-ons :: Bundles :: Bosch Smart Home Binding You should find a Dimmer, Roller Shutter II, and Light Control II. Hope that is the information you are looking for. If anything is missing, just let me know. `BOSCH Dimmer ------------ 2024-01-13 18:22:22.578 [DEBUG] [rnal.discovery.ThingDiscoveryService] - Found device: name=Dimmertest id=hdm:ZigBee:60b647fffe14a1e1 2024-01-13 18:22:22.580 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: CommunicationQuality 2024-01-13 18:22:22.582 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerSwitch 2024-01-13 18:22:22.584 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ChildProtection 2024-01-13 18:22:22.587 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ElectricalFaults 2024-01-13 18:22:22.589 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: MultiLevelSwitch 2024-01-13 18:22:22.592 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: DimmerConfiguration 2024-01-13 18:22:22.594 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: SwitchConfiguration { "@type": "device", "childDeviceIds": [ ], "deviceModel": "MICROMODULE_DIMMER", "deviceServiceIds": [ "CommunicationQuality", "PowerSwitch", "ChildProtection", "ElectricalFaults", "MultiLevelSwitch", "DimmerConfiguration", "SwitchConfiguration" ], "iconId": "ip_lamp_bulb_1", "id": "hdm:ZigBee:60b647fffe14a1e1", "manufacturer": "BOSCH", "name": "Dimmertest", "profile": "GENERIC", "roomId": "hz_16", "rootDeviceId": "64-da-a0-10-83-a7", "serial": "60B647FFFE14A1E1", "status": "AVAILABLE", "supportedProfiles": [ ] }, BOSCH Shutter Control II ------------------------ 2024-01-13 18:22:22.427 [DEBUG] [rnal.discovery.ThingDiscoveryService] - Found device: name=Treppenhaus Rollo id=hdm:ZigBee:b43a31fffeffae5d 2024-01-13 18:22:22.429 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerMeter 2024-01-13 18:22:22.432 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ShutterControl 2024-01-13 18:22:22.434 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: CommunicationQuality 2024-01-13 18:22:22.437 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ChildProtection 2024-01-13 18:22:22.440 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: SwitchConfiguration { "@type": "device", "childDeviceIds": [ ], "deviceModel": "MICROMODULE_SHUTTER", "deviceServiceIds": [ "PowerMeter", "ShutterControl", "CommunicationQuality", "ChildProtection", "SwitchConfiguration" ], "id": "hdm:ZigBee:b43a31fffeffae5d", "manufacturer": "BOSCH", "name": "Treppenhaus Rollo", "profile": "GENERIC", "roomId": "hz_6", "rootDeviceId": "64-da-a0-10-83-a7", "serial": "B43A31FFFEFFAE5D", "status": "AVAILABLE", "supportedProfiles": [ ] }, BOSCH Light Control II configured as 2 Light Switches (Brunnen, Olivenbaum) --------------------------------------------------------------------------- 2024-01-13 18:22:22.824 [DEBUG] [rnal.discovery.ThingDiscoveryService] - Found device: name=Brunnen id=hdm:ZigBee:70ac08fffefead2d#3 2024-01-13 18:22:22.826 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerSwitch 2024-01-13 18:22:22.828 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ChildProtection 2024-01-13 18:22:22.831 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerSwitchProgram 2024-01-13 18:22:22.833 [DEBUG] [rnal.discovery.ThingDiscoveryService] - Found device: name=Olivenbaum id=hdm:ZigBee:70ac08fffefead2d#2 2024-01-13 18:22:22.835 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerSwitch 2024-01-13 18:22:22.837 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: ChildProtection 2024-01-13 18:22:22.840 [DEBUG] [rnal.discovery.ThingDiscoveryService] - .... service: PowerSwitchProgram { "@type": "device", "childDeviceIds": [ "hdm:ZigBee:70ac08fffefead2d#3", "hdm:ZigBee:70ac08fffefead2d#2" ], "deviceModel": "MICROMODULE_LIGHT_CONTROL", "deviceServiceIds": [ "CommunicationQuality", "PowerMeter", "ElectricalFaults", "SwitchConfiguration" ], "id": "hdm:ZigBee:70ac08fffefead2d", "manufacturer": "BOSCH", "name": "LightMM_70ac08fffefead2d", "profile": "GENERIC", "rootDeviceId": "64-da-a0-10-83-a7", "serial": "70AC08FFFEFEAD2D", "status": "AVAILABLE", "supportedProfiles": [ ] }, { "@type": "device", "childDeviceIds": [ ], "deviceModel": "MICROMODULE_LIGHT_ATTACHED", "deviceServiceIds": [ "PowerSwitch", "ChildProtection", "PowerSwitchProgram" ], "iconId": "icon_mm_light_lantern", "id": "hdm:ZigBee:70ac08fffefead2d#3", "manufacturer": "BOSCH", "name": "Brunnen", "parentDeviceId": "hdm:ZigBee:70ac08fffefead2d", "profile": "GENERIC", "roomId": "hz_8", "rootDeviceId": "64-da-a0-10-83-a7", "serial": "70AC08FFFEFEAD2D", "status": "AVAILABLE", "supportedProfiles": [ ] }, { "@type": "device", "childDeviceIds": [ ], "deviceModel": "MICROMODULE_LIGHT_ATTACHED", "deviceServiceIds": [ "PowerSwitch", "ChildProtection", "PowerSwitchProgram" ], "iconId": "icon_mm_light_spot_br30", "id": "hdm:ZigBee:70ac08fffefead2d#2", "manufacturer": "BOSCH", "name": "Olivenbaum", "parentDeviceId": "hdm:ZigBee:70ac08fffefead2d", "profile": "GENERIC", "roomId": "hz_8", "rootDeviceId": "64-da-a0-10-83-a7", "serial": "70AC08FFFEFEAD2D", "status": "AVAILABLE", "supportedProfiles": [ ] }, `  Regards, Michael

…

Am 12.01.2024 um 22:59 schrieb David Pace ***@***.***>: Hi @mike-bike <https://github.com/mike-bike>, I need some information regarding the device IDs. The Light/Shutter Control II works with so called child devices. I think there should be one main device and two child devices. The child device IDs should contain # or %23. Could you please check whether you see the main device and the child device IDs in the listing when openHAB is started? If so, can you please post them here or send them via email? I need the main device ID, both child device IDs and the associated services. Thank you 🙂 — Reply to this email directly, view it on GitHub <#14562 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHVH7GHYBCYQ5Z3ACIV4VV3YOGW3VAVCNFSM6AAAAAAVVSVT4GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJQGAYTIOJSHE>. You are receiving this because you were mentioned.