Discharge Power1 register

[Fishy417]

Hi,

Just wondering if there is a way to edit the Discharge power1 field, If I use the discharge Time slots with the cards provided through HA then it will start discharging but it sets the output wattage to 495 and even when I manually increase watts with the app it will reset if I use the HA integration to trigger a discharge. I'm not sure if this is to do with inverter model, model is H2-10K-S3-A

I had a look through all the entities i could see but it doesn't appear this is an available register? As it appears at the discharge control not useful if it will always reset amount to 495w. Let me know if anything else would be useful to share for this or if I just missed how to actually set this if it is already accessible.

Thanks,

[stanus74]

Reinstall the integration:
Deactivate
Delete
Delete all entities saj
Restart ha

Reinstall integration and loveace Card , you must See Version number 1.1.3

[Fishy417]

Hi stanus,

I've deleted, cleared and reinstalled (i had v1.1.3 before reinstall) and first try it showed up as below, the discharge power percent shows as 5% though the time slot percent was 100%... second time i turned it off and started again at 97% it worked... ! i have tried other values previously and didn't work but seems to be now. Thanks maybe it was the reinstall resolved the issue and first try just had another issue... thanks!

[Fishy417]

So I think it's all working but noticed it still defaults back to 5% and if I enable discharge without touching the slider, the slider remembers last setting but wont apply it unless you actually change it. As below (FYI has same issue before i made a custom card for timer discharge) :