LSC 3215672 how to install Firmware

[TomaszCwik]

Hi Everyone,
I have problems with understanding how to install Thingino on LSC camera.
I find information that this Camera is supported

but i cannot find Zip file to install it on SD card.
I found a .BIN file and I want to run it temporarily from the SD card to prevent damaging the device (I'm connected via UART),
i don't have Flash programmer but i have access to SD Card and UART

Could you please help me ?

U-Boot 2013.07-gfc0af3c (Oct 28 2024 - 18:27:53)

Board: ISVP (Ingenic XBurst T23 SoC)
DRAM: 64 MiB
Top of RAM usable for U-Boot at: 84000000
Reserving 441k for U-Boot at: 83f90000
Reserving 32784k for malloc() at: 81f8c000
Reserving 32 Bytes for Board Info at: 81f8bfe0
Reserving 124 Bytes for Global Data at: 81f8bf64
Reserving 128k for boot params() at: 81f6bf64
Stack Pointer at: 81f6bf48
Now running in RAM - U-Boot at: 83f90000
MMC: msc: 0
the manufacturer 20
SF: Detected XM25QH64C

In: serial
Out: serial
Err: serial
Net: ====>PHY not found!Jz4775-9161
Hit any key to stop autoboot: 0
isvp_t23#

[wltechblog]

We don't have an "installer" for this model, but you can do it easily through uboot. Directions can be found here: https://github.com/themactep/thingino-firmware/wiki/U%E2%80%90Boot-Cheatsheet

[TomaszCwik]

In the meantime, I decided to install firmware to flash :D

i copy thingino-lsc_3215672_t23n_sc2331_atbm6012bx.bin to the SD card

and ran these commands

fatload mmc 0 0x82000000 thingino-lsc_3215672_t23n_sc2331_atbm6012bx.bin
sf probe 0
sf erase 0x0 0x800000
sf write 0x82000000 0x0 ${filesize}
reset

right now i'm stuck here, but i hope i fund solution in datasheet

[TomaszCwik]

Can i use thingino-galayou_g2_t23n_sc2336_atbm6012bx.bin to this camera ?
i cannot find Video chip information.

[TomaszCwik]

reported as issue:
#706