Telnet :: root login only without port definition (or is my ST-image different to others ?)

[treibbhaus]

Hi,

if I do want to login as root - I can only do that (with USB-Stick plugged in) by not using port 17000
(or is my ST-image different to others ? - otherwise the description/howto here is wrong

e.g: (without USB-Stick & no port defined)
telnet 192.168.0.67
Trying 192.168.0.67...
telnet: Unable to connect to remote host: Verbindungsaufbau abgelehnt
-> |

(without USB-Stick & port defined)
telnet 192.168.0.67 17000
Trying 192.168.0.67...
Connected to 192.168.0.67.
Escape character is '^]'.
->root
Command not found
-> |

(with USB-Stick & port defined)
telnet 192.168.0.67 17000
Trying 192.168.0.67...
Connected to 192.168.0.67.
Escape character is '^]'.
->root
Command not found
-> |

(with USB-Stick & no port defined)
telnet 192.168.0.67
Trying 192.168.0.67...
Connected to 192.168.0.67.
Escape character is '^]'.

... --- ..- -. -.. - --- ..- -.-. ....

    ____  ____  _____ _________
   / __ )/ __ \/ ___// _______/
  / __  / / / /\__ \/ __/

/ // / // // / /__
//_///___/

mojo login: root

eth0 Link encap:Ethernet HWaddr 08:DF:1F:11:95:D9
inet addr:192.168.0.67 Bcast:0.0.0.0 Mask:255.255.255.0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
usb0 Link encap:Ethernet HWaddr 76:3B:8C:CC:C8:32
inet addr:203.0.113.1 Bcast:0.0.0.0 Mask:255.255.255.252

Fri Jan 30 19:16:29 CET 2026

Device name: "ST30"
Country EU, Region (not set)
Module type: scm
root@mojo:~# |

Can somebody confirm ?