No telegrams for apator e-itn 30.4

[spbdimka]

good day, I'm trying to get data from heat sensors. I have at least 6 of them, it's an apartment building
I'm using a blue Chinese sdr - dvb-t+fm+dab (R860 & SDR)

I tried it on both Windows and Linux

rtl_sdr -f868.625M -s1800000 -g20 - | rtl_wmbus -o -s
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Found Fitipower FC0012 tuner
Sampling at 1800000 S/s.
Tuned to 868625000 Hz.
Tuner gain set to 19.20 dB.
Reading samples in async mode...

I tried adjacent frequencies with a step of 50 kHz, sampling frequency of 1600000 and launch with different keys
zero telegram, at the same time in sharpsdr I periodically see information on these frequencies
I can't understand what the problem is - my receiver or the sensors are silent (according to the specification, they should report information once every 4 minutes and once every 30 seconds for three days on the day of transmitting readings)

Please help with directions to solve the problem

[xaelsouth]

Good day. The sampling frequency has been set wrong. Choose 1600000 instead of 1800000. If it does not work, remove "-g20" from the rtl-sdr cmdline.

[spbdimka]

no luck
g20 if I'm not mistaken, should help improve the signal, setting amplifier to max, anyway not telegrams

[xaelsouth]

1. But you have tried with the correct sampling rate of 1600000? I'f asking because you had put 1800000 in the command line.
2. Try to remove -o from rtl-wmbus's command line. Typically there is no need of using DC filter
3. Or try at least jut this: rtl_sdr -f 868.95M -s 1600000 - 2>/dev/null | build/rtl_wmbus

As the Apator HCA operates on 868.95MHz it should work. Is the radio enabled?...

[spbdimka]

Sure, im also buy dongle on r820t instead r860
Same result

[JuniorJPDJ]

I'm having Apator E-ITN 30.34 and I also cannot see any packets.
Using RTL-SDR Blog V2
Seeing lots of Apator Water Meters, but cannot catch Heat Meter at all.

Tried that:
rtl_sdr -d 0 -f 868.95M -s 1600000 - | rtl_wmbus | tee -a wmbus.txt
and that:
rtl_sdr -d 0 -f 868.625M -s 1600000 - | rtl_wmbus -s | tee -a wmbus.txt

[spbdimka]

As I understand it, they have a reporting date on which they begin their activity (dF on the screen) and it is on this plus or minus day that you need to catch datagrams