release v1.4.10

increased phase switch minimum delay to 5 minutes to match the phase switch cooldown time.

release v1.4.9

Suppression cooldown timer and user notification for phase switch when EV is disconnected.

• when no EV is connected, phase switching in rapid succession is allowed.

release v1.4.8

• Fine-tuned the 3p -> 1p switch logic.
• Phase switch candidate timer reset fix.

release v1.4.7

Added cold start scenario for 3p -> 1p phase switch:

• When connecting EV in 3p mode with insufficient power to start 3p charging but sufficient for 1p, the system will now automatically switch to 1p after the configured delay and start charging.

release v1.4.6

Added clamping functionality for net power target based on dynamic thresholds:

• a lower net power target vs max peak avg would result in a untimely charge stop because of a below lower threshold activation.

Updated power threshold calculations and phase switching threshold with net power target:

• phase switching now takes into account the net power target setting.

release v1.4.5

changed icons for the new sensors and adapted the readme with new images.

release v1.4.4

Added 3 new diagnostic sensors for user convenience:

• Start threshold sensor: shows at what net power level charging will start/resume
• Stop threshold sensor: shows at what net power level charging will stop
• Phase switch threshold sensor: shows at what net power level a phase switch will occur

These sensors automatically update when related settings change, including:

• ECO mode toggle
• Max peak avg limit changes
• Phase mode changes (1p/3p)
• Threshold configuration changes

release v1.4.3

fixed an issue in the phase switching logic where the thresholds weren't respected, resulting in switching to early or not at all.

release v1.4.2

Expanded Net power target range to 10kW.
Reduced minimum phase switching delay to 5min.

release v1.4.1

A. Added support for external phase switching control. Two modes are now available:

• Integration-controlled: EVCM controls phase switching
• Wallbox-controlled: The wallbox handles phase switching internally

B. Some phase switching related fixes.