HSLinkPro-2.4.4

What's Changed

• hslink: gpio mode swd timing optimize by @akkako in #72
• hslink: Reverse reset level on hw 1.3.x by @kaidegit in #73

New Contributors

• @akkako made their first contribution in #72

Full Changelog: HSLinkPro-2.4.3...HSLinkPro-2.4.4

HSLinkPro-2.4.3

What's Changed

• code format
• refactor: implement Set_Clock_Delay with io & spi, no use macro
• refactor: merge hid config into dap_main
• feat: enable webusb
• fix: make reset level standard, reset level means active level in reset
• fix: remove jtag shift mode
• hslink: 使用主线b64.c by @kaidegit in #60
• fix: SWD_Sequence stuck in spi mode when req bits less than 8 by @kaidegit in #61
• doc: add faq about short connect vref&tvcc by @kaidegit in #65
• hslink: add button trigger reset by @kaidegit in #67

Full Changelog: HSLinkPro-2.4.2...HSLinkPro-2.4.3

HSLinkPro-2.4.2

What's Changed

• perf: 使用FGPIO作为控制器 by @HalfSweet in #49
• feat: 添加JTAG 20P兼容模式 by @HalfSweet in #50
• hslink: support hw 1.3.0 by @kaidegit in #52
• fix: nickname by @HalfSweet in #55
• add comm failed faq by @kaidegit in #56
• 支持 HPM SDK 1.9.0 by @solosky in #57
• doc: add ProductionGuide link by @kaidegit in #58

New Contributors

• @solosky made their first contribution in #57

Full Changelog: HSLinkPro-2.4.1...HSLinkPro-2.4.2

HSLinkPro-2.4.1

What's Changed

• hslink: fix: download reset mode do not clear by @kaidegit in #42
• CherryDAP on esp32s3 by @iiJetLi in #43
• hslink: update doc by @kaidegit in #44
• hslink: add how to fix uart messy by @kaidegit in #46
• fix: settings read from flash by @kaidegit in #47
• esp32s3 remove redundant usbd config code in chry_dap_init() by @iiJetLi in #45
• Jtag single bit by @HalfSweet in #48

New Contributors

• @iiJetLi made their first contribution in #43

Full Changelog: HSLinkPro-2.4.0...HSLinkPro-2.4.1

HSLinkPro-2.4.0

What's Changed

• fix: 上位机设置的LED开启状态无效 by @HalfSweet in #35
• hslink: fix: boot would fail when led is off by @kaidegit in #36
• refactor: hpm eeprom emulation -> fal+flashdb by @kaidegit in #37
• hslink: Support upgrade bootloader by @kaidegit in #38
• doc: update hslink doc by @kaidegit in #39
• hslink: fix: some error in part cfg by @kaidegit in #40

Full Changelog: HSLinkPro-2.3.4...HSLinkPro-2.4.0

HSLinkPro-2.3.4

What's Changed

• enhance: enable ws2812 on hslink pro, using gpio polling by @kaidegit in #31
• hslink: Enable ws2812 on hw v1.2.x by @kaidegit in #32
• hslink: add version upload by @kaidegit in #33

Full Changelog: HSLinkPro-2.3.3...HSLinkPro-2.3.4

HSLinkPro-2.3.3

release: 2.3.3

HSLinkPro-2.3.2

HSLink-Pro: 2.3.2 (#30)

HSLinkPro-2.3.1

HSLink-Pro: 2.3.1 (#29)

* update: 更新电源部分

* update: 更新原理图

* update: 更新PCB

- 修改定位孔位置
- 修改Type-C位置

* update: 添加RTT LOGO

* chore: 添加cJSON库

* feat: 添加与上位机的HID通信接口

* refactor: 重构命令解析部分代码

* fix: 修复描述符错误

* feat: 添加上位机下发设置功能

* feat: 添加数据保存

* fix: 修复可能的一些错误

* fix: 修复写入flash死机问题

* fix: 潜在的内存泄露问题

* chore: 添加tlsf

* chore: 切换cJSON库位置

* feat: 内存管理切换为tlsf

* feat: 添加首次默认设置

* feat: 添加硬件版本号

* feat: 添加获取设置

* chore: 将项目修改为cpp

* feat: 重构为cpp

* fix: 修复release下可能会崩溃的玄学问题

* chore: 删除cJSON库

* fix: 修复RapidJSON库所需内存

* fix: 修复nickname设置问题

* fix: BL工程编译失败

* fix: BL工程里面关闭所有输出

* fix: 修复一些warning

* update: README

* fix: get_setting字段错误

* update: 1.2.0硬件

* style: 统一接口命名

* feat: 添加upgrade命令

* fix: 将硬件版本号放在OTP寄存器中

* fix: 解决初始值问题

* fix: PWM输出极性反了

* fix: 1.2.0硬件修改IO

* release: 2.3.1

HSLinkPro-2.3.0

fix: 添加CI写入权限