PerformanceTweaker

MyLargeTurretBase

This will throttle the update rate for turrets to only update on each 100 ticks/ms instead of each tick/second.
When a target is found, the turret will switch to a "hot" mode and the throttle is ignored.
Until the target is lost for >= 300 ticks/ms, then it switches back to default "cold" mode.

Throttle options:
Sim Speed:
When ServerSimulationRatio < Threshold, then throttle the update rate by ServerSimulationRatio / Threshold, instead of 1.
Examples:

• ServerSimulationRatio = 1 and Threshold = 0.8, the default throttle of 100 ticks/ms is used.
• ServerSimulationRatio = 0.7 and Threshold = 0.8, it will only update on each 114 ticks/ms.
• ServerSimulationRatio = 0.5 and Threshold = 0.8, it will only update on each 160 ticks/ms.

Sim CPU Load:
When ServerCPULoad > Threshold, then throttle the update rate by Threshold / ServerCPULoad, instead of 1.
Examples:

• ServerCPULoad = 10 and Threshold = 50, the default throttle of 100 ticks/ms is used.
• ServerCPULoad = 70 and Threshold = 50, it will only update on each 140 ticks/ms.
• ServerCPULoad = 100 and Threshold = 50, it will only update on each 200 ticks/ms.

Static:
10 means default update rate, any higher rate will cause a lower update rate.
Examples:

• Threshold = 10, the default throttle of 100 ticks/ms is used.
• Threshold = 20, it will only update on each 200 ticks/ms.
• Threshold = 50, it will only update on each 500 ticks/ms.

Disabled:
Disable turret updates, turrets will not work anymore!!!