NETOBSERV-1956: NETOBSERV-1957: webhook conntrack cases

[jotak]

Description

• Warn on performance impacts when using conntrack All
• Make conntrack+no-loki invalid

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
  • If so, make sure the JIRA epic is labeled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
  • If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
  • If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
  • Standard QE validation, with pre-merge tests unless stated otherwise.
  • Regression tests only (e.g. refactoring with no user-facing change).
  • No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1956 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.19.0" version, but no target version was set.

Details

In response to this:

Description

• Warn on performance impacts when using conntrack All
• Make conntrack+no-loki invalid

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labeled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by:
Once this PR has been reviewed and has the lgtm label, please ask for approval from jotak. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1956 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.19.0" version, but no target version was set.

Details

In response to this:

Description

• Warn on performance impacts when using conntrack All
• Make conntrack+no-loki invalid

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labeled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[Amoghrd]

/ok-to-test

[github-actions]

New images:

• quay.io/netobserv/network-observability-operator:f5e95f6
• quay.io/netobserv/network-observability-operator-bundle:v0.0.0-f5e95f6
• quay.io/netobserv/network-observability-operator-catalog:v0.0.0-f5e95f6

They will expire after two weeks.

To deploy this build:

# Direct deployment, from operator repo
IMAGE=quay.io/netobserv/network-observability-operator:f5e95f6 make deploy

# Or using operator-sdk
operator-sdk run bundle quay.io/netobserv/network-observability-operator-bundle:v0.0.0-f5e95f6

Or as a Catalog Source:

apiVersion: operators.coreos.com/v1alpha1
kind: CatalogSource
metadata:
  name: netobserv-dev
  namespace: openshift-marketplace
spec:
  sourceType: grpc
  image: quay.io/netobserv/network-observability-operator-catalog:v0.0.0-f5e95f6
  displayName: NetObserv development catalog
  publisher: Me
  updateStrategy:
    registryPoll:
      interval: 1m

[Amoghrd]

/label qe-approved

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1956 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.19.0" version, but no target version was set.

Details

In response to this:

Description

• Warn on performance impacts when using conntrack All
• Make conntrack+no-loki invalid

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labeled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.