Libersuite Panel

An SSH & dnstt tunnel management service built with Go

---

About

Libersuite Panel is an SSH and dnstt tunnel management service designed to simplify the administration of SSH/dnstt servers. Built with Go for performance and reliability, it provides an intuitive interface for managing SSH connections, users, and server configurations.

Installation

DNS Configuration

Before installing, you need to configure your DNS records. This step is required for dnstt to function properly.

Example DNS Configuration:

1. Create an A record:

   A    tns.example.com    1.2.3.4
   

2. Create an NS record:

   NS   t.example.com      tns.example.com
   

Replace example.com with your actual domain and 1.2.3.4 with your server's IP address.

Make Sure Port 53 is Free

On some servers, port 53 is occupied by systemd-resolved. To make sure port 53 is free and available for Libersuite Panel, follow these steps:

1. Edit /etc/systemd/resolved.conf:

   Open the configuration file in a text editor:

   sudo nano /etc/systemd/resolved.conf

   • If you see a line like DNSStubListener=yes, change it to:

     DNSStubListener=no
     

   • You can also add or set an upstream DNS server (such as Cloudflare’s DNS):

     DNS=1.1.1.1
     

2. Update /etc/resolv.conf:

   Replace the default resolv.conf with a symlink to systemd’s configuration:

   sudo ln -sf /run/systemd/resolve/resolv.conf /etc/resolv.conf

3. Restart systemd-resolved for the changes to take effect:

   sudo systemctl restart systemd-resolved

Quick Install

Once your DNS is configured, install Libersuite Panel with a single command:

bash <(curl -Ls https://raw.githubusercontent.com/omid-official/libersuite-panel/master/install.sh)

Usage

Basic Commands

# Start the panel
libersuite start

# Stop the panel
libersuite stop

# Restart the panel
libersuite restart

# View logs
libersuite logs

Client Management Commands

Libersuite provides commands to manage SSH VPN clients from your terminal:

# Add a new client
libersuite client add <username> <password> [traffic_limit_gb] [expires_in_days]

# List all clients
libersuite client list

# Remove a client
libersuite client remove <username>

# Enable a client
libersuite client enable <username>

# Disable a client
libersuite client disable <username>

# Export client config URLs (SSH & dnstt)
libersuite client export <username> <server_ip>

Command Descriptions

• client add: Adds a new client with optional traffic-limit (in GB) and expiration (in days).
• client list: Lists all existing clients with their status, expiry, and usage.
• client remove: Removes the specified client.
• client enable: Enables a disabled client.
• client disable: Disables a client.
• client export: Outputs SSH and DNSTT config URLs for the specified client.

Example to add a client with a 10GB traffic limit, valid for 30 days:

libersuite client add someone password123 10 30

Example to export a client config:

libersuite client export someone server_ip

Client

You can use NetMod client.

Contributing

Contributions are welcome! Feel free to open an issue or submit a PR.

License

This project is licensed under the MIT License - see the LICENSE file for details.

Support

• If you find this project useful, please consider starring the repository ⭐