🎵 Multi-Room Preset Player for Bluesound and Sonos Devices

A Multi-Room audio controller with interactive and non-interactive modes, multi-language support, and automatic network scanning for BlueOS and Sonos devices.

✨ Features

🔍 Automatic Network Scanning - Finds all BluOS and Sonos players on your network
🌍 Multi-Language Support - English, German, and Swahili
🎮 Two Control Modes - Interactive TUI and CLI command mode
📱 Multiple Player Support - Control different players easily
🎵 Full Playback Control - Play, pause, stop, volume, and preset management
🔗 Player Grouping - Group BluOS players for synchronized playback
🔄 Consistent Player Ordering - Players always appear in the same order (sorted by IP)

📦 Installation

Option 1: Build from Source

# Clone the repository
git clone <repository-url>
cd bluesoundplayer

# Build for your platform
cd src
go build -o ../bluesoundplayer *.go

Option 2: Build for Multiple Platforms

# Using Makefile
make all              # Build for all platforms
make linux            # Linux AMD64
make windows          # Windows AMD64
make raspberry        # All Raspberry Pi variants
make apple            # macOS (Intel and Apple Silicon)

# Or using build script
./build_execs.sh

🚀 Usage Modes

Interactive Mode (TUI)

Start without any flags to enter the interactive mode:

./bluesoundplayer

The app will:

Scan your network for all players
Let you select a player interactively
Display a live interface with status, presets, and commands

Non-Interactive Mode (CLI)

Use the -c flag for single command execution:

./bluesoundplayer -c [options] [command]

Important: Most command-line options require the -c flag to enable CLI mode!

📋 Command Line Reference

Quick Access Flags (No `-c` Required)

These flags work directly without -c:

Flag	Description	Example
`-list`	List all available players	`./bluesoundplayer -list`
`-help`	Show help message	`./bluesoundplayer -help`
`-status`	Show status of first player	`./bluesoundplayer -status`
`-presets`	Show presets of first player	`./bluesoundplayer -presets`

Note: -status and -presets operate on the first discovered player (lowest IP address).

Player Selection (Requires `-c`)

Choose which player to control:

Flag	Description	Example
`-ip <address>`	Select by IP address	`-c -ip 192.168.1.100`
`-player <N>`	Select by index (1-N)	`-c -player 2`
`-type <type>`	Filter by device type	`-c -type bluos`

Player Selection Priority:

If -ip is specified → Uses that specific player
If -player is specified → Uses player at that index
If neither → Uses first player found (sorted by IP)

Device Types:

bluos - BluOS devices (Bluesound, NAD, etc.)
sonos - Sonos devices

Playback Commands (Requires `-c`)

Flag	Description	Example
`-cmd play`	Start/resume playback	`-c -ip 192.168.1.100 -cmd play`
`-cmd pause`	Pause playback	`-c -player 1 -cmd pause`
`-cmd stop`	Stop playback	`-c -ip 192.168.1.100 -cmd stop`
`-cmd next`	Skip to next track	`-c -player 2 -cmd next`
`-cmd prev`	Previous track	`-c -ip 192.168.1.100 -cmd prev`

Direct Actions (Requires `-c`)

Flag	Description	Example
`-preset <ID>`	Play specific preset	`-c -ip 192.168.1.100 -preset 3`
`-volume <0-100>`	Set volume level	`-c -player 1 -volume 50`

Information Commands

Flag	Description	Requires `-c`
`-cmd status`	Show player status	Yes
`-cmd presets`	List presets	Yes
`-cmd list`	List all players	Yes
`-status`	Show first player status	No
`-presets`	Show first player presets	No
`-list`	List all players	No

💡 Practical Examples

Discovery & Information

# List all players on network (sorted by IP)
./bluesoundplayer -list

# List only BluOS devices
./bluesoundplayer -c -type bluos -list

# List only Sonos devices
./bluesoundplayer -c -type sonos -list

# Quick status check of first player
./bluesoundplayer -status

# Detailed status of specific player
./bluesoundplayer -c -ip 192.168.1.100 -cmd status

# Show presets of second player
./bluesoundplayer -c -player 2 -cmd presets

Playback Control

# Play preset 5 on first player
./bluesoundplayer -c -preset 5

# Play preset on specific player by IP
./bluesoundplayer -c -ip 192.168.1.100 -preset 3

# Play preset on second player from list
./bluesoundplayer -c -player 2 -preset 1

# Resume playback on specific player
./bluesoundplayer -c -ip 192.168.1.100 -cmd play

# Pause all Sonos devices (using scripting)
for ip in $(./bluesoundplayer -c -type sonos -list | grep "IP:" | awk '{print $2}'); do
    ./bluesoundplayer -c -ip $ip -cmd pause
done

# Skip to next track
./bluesoundplayer -c -ip 192.168.1.100 -cmd next

Volume Control

# Set volume to 50% on specific player
./bluesoundplayer -c -ip 192.168.1.100 -volume 50

# Set volume on second player from list
./bluesoundplayer -c -player 2 -volume 75

# Set volume and show updated status
./bluesoundplayer -c -ip 192.168.1.100 -volume 40 && \
./bluesoundplayer -c -ip 192.168.1.100 -cmd status

# Quiet mode for all BluOS devices
./bluesoundplayer -c -type bluos -volume 20

Workflow Examples

# Morning routine: Start radio at comfortable volume
./bluesoundplayer -c -ip 192.168.1.100 -volume 30
./bluesoundplayer -c -ip 192.168.1.100 -preset 1

# Evening: Fade to quiet and stop
./bluesoundplayer -c -ip 192.168.1.100 -volume 10
sleep 60
./bluesoundplayer -c -ip 192.168.1.100 -cmd stop

# Party mode: Start same preset on all players
PRESET=3
for ip in $(./bluesoundplayer -list | grep "IP:" | awk '{print $2}'); do
    ./bluesoundplayer -c -ip $ip -preset $PRESET
done

Common Mistakes & Solutions

❌ Wrong:

# Forgot -c flag with command options
./bluesoundplayer -ip 192.168.1.100 -cmd play

Error: "Command-line options provided without enabling CLI mode"

✅ Correct:

# Use -c flag for CLI mode
./bluesoundplayer -c -ip 192.168.1.100 -cmd play

❌ Wrong:

# Using player index from old scan
./bluesoundplayer -list          # Player 2 is Kitchen
# ... time passes, players turn on/off ...
./bluesoundplayer -c -player 2   # Might be different now!

✅ Correct:

# Always use IP address for specific player
./bluesoundplayer -c -ip 192.168.1.101 -cmd play

❌ Wrong:

# Trying to use -type in interactive mode
./bluesoundplayer -type bluos
# Still shows all devices

✅ Correct:

# Use -type with -c and commands
./bluesoundplayer -c -type bluos -list
# Or just use interactive without filters
./bluesoundplayer

🎮 Interactive Mode Commands

Once in interactive mode, use these commands:

Command	Description
`play <id>`	Play preset by ID
`play`	Start/resume playback
`pause`	Pause playback
`stop`	Stop playback
`next`	Skip to next track
`prev`	Go to previous track
`vol <0-100>`	Set volume level
`status`	Refresh status
`presets`	Refresh presets list
`output <id>`	Switch to different player
`group <id1+id2>`	Group players (BluOS only)
`ungroup`	Ungroup all players
`lang <en\|de\|sw>`	Change language
`debug`	Show API diagnostics
`help`	Show help
`quit` / `exit`	Exit program

Interactive Mode Example Session

🎵 Multi-Room Audio Controller
======================================================================
🔍 Scanning network for audio players...
   ✅ Found: Kitchen (Node 2i) at 192.168.1.100 [BluOS]
   ✅ Found: Living Room (Play:3) at 192.168.1.101 [Sonos]

📱 Available Players:
  [1] Kitchen (Bluesound Node 2i) - 192.168.1.100 [BluOS]
  [2] Living Room (Sonos Play:3) - 192.168.1.101 [Sonos]

Select a player (1-2): 1
✅ Connected to: Kitchen (192.168.1.100)

🎵 Multi-Room Audio Controller - Interactive Mode
======================================================================
🔗 Current Player: Kitchen [BluOS]

📱 Available Players:
  [1] Kitchen (192.168.1.100) [BluOS] ✅
  [2] Living Room (192.168.1.101) [Sonos]

📊 Status: stop | Volume: 50%
🎵 No song playing

📋 Available Presets/Favorites:
  [1] Spotify Daily Mix
  [2] Radio Paradise
  [3] Classical WQXR

🎮 Available Commands:
  play <id> | play | pause | stop | next | prev | vol <0-100>
  output <id> | group <id1+id2> | ungroup | lang <en|de|sw> | quit

======================================================================
Command> play 2
✅ Playing preset 2

📊 Status: stream | Volume: 50%
🎵 World Music - Radio Paradise

Command> vol 35
🔊 Volume set to 35%

Command> output 2
🔄 Switched to player 2: Living Room

Command> quit
👋 Goodbye!

🌍 Multi-Language Support

Switch languages in interactive mode:

Command	Language	UI Example
`lang en`	🇺🇸 English	"✅ Connected to: Living Room"
`lang de`	🇩🇪 Deutsch	"✅ Verbunden mit: Wohnzimmer"
`lang sw`	🇹🇿 Kiswahili	"✅ Imeunganishwa na: Sebule"

🏠 Home Automation Integration

Cron Jobs

# /etc/crontab - Morning radio weekdays at 7 AM
0 7 * * 1-5 pi /home/pi/bluesoundplayer -c -ip 192.168.1.100 -preset 1 -volume 30

# Stop music at midnight
0 0 * * * pi /home/pi/bluesoundplayer -c -ip 192.168.1.100 -cmd stop

# Volume down every 5 minutes from 22:00 to 23:00
*/5 22 * * * pi /home/pi/bluesoundplayer -c -ip 192.168.1.100 -volume 20
55 22 * * * pi /home/pi/bluesoundplayer -c -ip 192.168.1.100 -volume 10
0 23 * * * pi /home/pi/bluesoundplayer -c -ip 192.168.1.100 -cmd stop

Bash Scripts

#!/bin/bash
# morning-radio.sh - Start morning radio routine

PLAYER_IP="192.168.1.100"
RADIO_PRESET=3
VOLUME=40

echo "Starting morning radio..."
/home/pi/bluesoundplayer -c -ip $PLAYER_IP -volume $VOLUME
/home/pi/bluesoundplayer -c -ip $PLAYER_IP -preset $RADIO_PRESET
echo "✓ Radio started at volume $VOLUME%"

#!/bin/bash
# goodnight.sh - Fade out and stop all players

echo "Starting goodnight routine..."

# Get all player IPs
PLAYERS=$(/home/pi/bluesoundplayer -list | grep "IP:" | awk '{print $2}')

# Fade to 20%
for IP in $PLAYERS; do
    /home/pi/bluesoundplayer -c -ip $IP -volume 20
done
sleep 30

# Fade to 10%
for IP in $PLAYERS; do
    /home/pi/bluesoundplayer -c -ip $IP -volume 10
done
sleep 30

# Stop all
for IP in $PLAYERS; do
    /home/pi/bluesoundplayer -c -ip $IP -cmd stop
    echo "✓ Stopped player: $IP"
done

echo "Goodnight!"

Home Assistant

# configuration.yaml
shell_command:
  play_radio: "/usr/local/bin/bluesoundplayer -c -ip 192.168.1.100 -preset 3"
  stop_music: "/usr/local/bin/bluesoundplayer -c -ip 192.168.1.100 -cmd stop"
  set_volume: "/usr/local/bin/bluesoundplayer -c -ip 192.168.1.100 -volume {{ volume }}"

# automations.yaml
- alias: "Morning Music"
  trigger:
    platform: time
    at: "07:00:00"
  condition:
    condition: state
    entity_id: binary_sensor.workday
    state: 'on'
  action:
    service: shell_command.play_radio

- alias: "Volume Down at Night"
  trigger:
    platform: time
    at: "22:00:00"
  action:
    service: shell_command.set_volume
    data:
      volume: 20

Node-RED Flow

[
    {
        "id": "morning_radio",
        "type": "exec",
        "command": "/usr/local/bin/bluesoundplayer -c -ip 192.168.1.100 -preset 1 -volume 30",
        "name": "Morning Radio"
    },
    {
        "id": "stop_music",
        "type": "exec",
        "command": "/usr/local/bin/bluesoundplayer -c -ip 192.168.1.100 -cmd stop",
        "name": "Stop Music"
    }
]

🔧 Building for Multiple Platforms

Using Makefile

# Build for all platforms
make all

# Build for specific platforms
make linux          # Linux AMD64
make windows        # Windows AMD64
make raspberry      # All Raspberry Pi variants
make apple          # macOS (Intel and Apple Silicon)

# Individual targets
make rpi-armv6      # Raspberry Pi 1/Zero/Zero W
make rpi-armv7      # Raspberry Pi 2/3/4/Zero 2 W
make rpi-arm64      # Raspberry Pi 4/5 (64-bit)
make apple-arm64    # Apple Silicon (M1/M2/M3/M4)
make apple-amd64    # Intel Macs

# Utility commands
make clean          # Clean build artifacts
make test           # Test if project builds
make run            # Run locally for development
make list           # List built executables
make fmt            # Format Go code

Using Build Script

# Build all platforms
./build_execs.sh

# Executables will be in release/ directory
ls release/

🔍 Troubleshooting

No Players Found

# Check network connectivity
ping 192.168.1.100

# Verify players are on same network
ip addr show

# Test BluOS player manually
curl http://192.168.1.100:11000/SyncStatus

# Test Sonos player manually
curl http://192.168.1.101:1400/xml/device_description.xml

# Check firewall settings
sudo ufw status

Player Index Changes

Problem: Player indices change between scans

Solution: Always use IP addresses for scripts:

# ✅ Good - Uses stable IP
./bluesoundplayer -c -ip 192.168.1.100 -preset 3

# ❌ Bad - Index might change
./bluesoundplayer -c -player 2 -preset 3

Permission Errors

# Make executable
chmod +x bluesoundplayer

# Install system-wide
sudo cp bluesoundplayer /usr/local/bin/

# Check permissions
ls -la /usr/local/bin/bluesoundplayer

Debugging

# Test connectivity in interactive mode
./bluesoundplayer
Command> debug

# Check API endpoints via CLI
./bluesoundplayer -c -ip 192.168.1.100 -cmd status

# Verbose network scan
./bluesoundplayer -list

🔗 Technical Details

Supported Devices

BluOS Devices (Port 11000):

Bluesound (Node, Powernode, Pulse, Vault, etc.)
NAD (C 658, C 368, M10, etc.)
DALI
And other BluOS-compatible devices

Sonos Devices (Port 1400):

All Sonos speakers and components
Uses SOAP/UPnP protocol

API Protocols

BluOS:

Protocol: HTTP REST API
Port: 11000
Format: XML responses
Examples: /Status, /Presets, /Play, /Volume?level=50

Sonos:

Protocol: SOAP/UPnP
Port: 1400
Services: AVTransport, RenderingControl, ContentDirectory

Player Discovery

Scans all network interfaces automatically
Checks each IP in subnet (x.x.x.1-254)
Results sorted by IP address for consistency
Deduplicates players found on multiple interfaces

📄 License

This project is open source. Check the LICENSE file for details.

🤝 Contributing

Contributions are welcome! Please feel free to submit:

Bug reports
Feature requests
Pull requests
Documentation improvements

🙏 Acknowledgments

BluOS API documentation
Sonos UPnP/SOAP protocol specifications
Go community for excellent networking libraries

Name		Name	Last commit message	Last commit date
Latest commit History 25 Commits
flutter		flutter
release		release
src		src
.gitignore		.gitignore
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
build_execs.sh		build_execs.sh

License

rdOxalis/bluesoundplayer

Folders and files

Latest commit

History

Repository files navigation

🎵 Multi-Room Preset Player for Bluesound and Sonos Devices

✨ Features

📦 Installation

Option 1: Build from Source

Option 2: Build for Multiple Platforms

🚀 Usage Modes

Interactive Mode (TUI)

Non-Interactive Mode (CLI)

📋 Command Line Reference

Quick Access Flags (No -c Required)

Player Selection (Requires -c)

Playback Commands (Requires -c)

Direct Actions (Requires -c)

Information Commands

💡 Practical Examples

Discovery & Information

Playback Control

Volume Control

Workflow Examples

Common Mistakes & Solutions

🎮 Interactive Mode Commands

Interactive Mode Example Session

🌍 Multi-Language Support

🏠 Home Automation Integration

Cron Jobs

Bash Scripts

Home Assistant

Node-RED Flow

🔧 Building for Multiple Platforms

Using Makefile

Using Build Script

🔍 Troubleshooting

No Players Found

Player Index Changes

Permission Errors

Debugging

🔗 Technical Details

Supported Devices

API Protocols

Player Discovery

📄 License

🤝 Contributing

🙏 Acknowledgments

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 3

Packages 0

Contributors 2

Uh oh!

Languages

Quick Access Flags (No `-c` Required)

Player Selection (Requires `-c`)

Playback Commands (Requires `-c`)

Direct Actions (Requires `-c`)

Packages