This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.

The code example demonstrates connecting to the Azure IoT services using the Azure SDK for Embedded C. This code example demonstrates the features such as iot hub - C2D, Telemetry, Methods, Twin, Provisioning, Plug and Play.

This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

mtb-example-usb-device-audio-recorder

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-freertos. This example demonstrates how to use PSoC 6 MCU to implement a USB Audio Device and HID Consumer Control that connects to the PC via the USB interface. The example also uses FreeRTOS.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE co…

mtb-example-usb-device-cdc-echo

This example demonstrates updating the device firmware using the Over-The-Air (OTA) feature of Amazon FreeRTOS.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-mouse. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

This code example demonstrates Over-the-Air (OTA) firmware update using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates Over-the-Air (OTA) update with PSoC® 6 MCU and CYW43xxx connectivity devices.

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.