Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This code example demonstrates the implementation of a simple Bluetooth LE Immediate Alert Service (IAS)-based Find Me Profile (FMP) using PSoC 6 MCU with Bluetooth Low Energy Connectivity.

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.

This is a minimal starter dual-CPU security application template for PSoC™ 62/63 MCU devices. This code example is meant to be a companion to the AN221111 – PSoC™ 6 MCU: Designing a secured system application note. It demonstrates the following features to create a secured system as explained in the application note.

This example demonstrates the use of SPI SCB (Serial Communication Block) resource for PSoC® 6 MCU in Master mode using DMA.

This code example demonstrate basic device firmware update (DFU), also known as "bootloading", with PSoC® 6 MCU. This includes downloading an application from a host and installing it in device flash, and then transferring control to that application.

This code example demonstrates the implementation of a BLE Battery Service using PSoC 6 MCU with Bluetooth Low Energy Connectivity (PSoC 6 BLE). This code example implements a GATT Server with the Battery Service and Device Information Service BLE standards. This code example uses FreeRTOS.

This example demonstrates how to transition PSoC 6 MCU to the following power modes - Low Power Active, Low Power Sleep, Ultra Low Power Active, Ultra Low Power Sleep, and Deep Sleep.

This code example shows how to generate a 32-byte hash value or message digest for an arbitrary user input message with the SHA2 algorithm using the Cryptographic hardware block in PSoC 6 MCU.

This empty application provides a template for creating applications using PSoC 6 devices.