This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This code example demonstrates the use of the I2C resource in HAL in slave mode. The I2C slave is configured to receive command packets to control a user LED on the kit.

This example demonstrates the operation of the I2C (HAL) resource for PSoC 6 MCU in Slave mode using callbacks

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This code example demonstrates implementing a UDP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates implementing a UDP server using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This design implements a BLE FMP that consists of an IAS. FMP and IAS are BLE standard Profile and Service respectively, as defined by the Bluetooth SIG. The design uses LED to display the IAS alert level – no alert (LED OFF), mild alert (LED blinking), high alert (LED ON).

This example demonstrates the fault handling functionality of PSoC 6 MCU using Peripheral Driver Library (PDL) System Library (SysLib) and ModusToolbox integrated development environment (IDE).