-
Notifications
You must be signed in to change notification settings - Fork 115
spec i2c write
Ken Sharp edited this page Dec 10, 2025
·
2 revisions
Write one or more bytes on the I2C channel.
VI takes address, byte array.
| I2C Write Command | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Write one or more bytes on the I2C bus. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Size | Variable | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Format | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
| SoF : 0xFF | PACKET SIZE | PACKET NUM | CMD : 0x00E2 | CHANNEL | ADDRESS | EOF CONFIG* | DATA | CHECKSUM | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SoF | Start of Frame. Always 0xFF. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PACKET SIZE | Packet Size In Bytes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PACKET NUM | The Current Packet Number. This value increments with each new packet or repeats for a multi packet command. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CMD | I2C Write Command. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CHANNEL | I2C channel to write to. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ADDRESS | I2C slave address. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EOF CONFIG* | End of frame configuration. 0x00 = Default 0x01 = Restart 0x02 = Restart No Stop 0x03 = No Stop | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DATA | Variable Length. Data to write to the I2C channel. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CHECKSUM | Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| I2C Write Response | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description | LINX device's response to I2C Write Command | |||||||||||||||||||||||||||||||||||||||||||||||
| Size | 6 Bytes | |||||||||||||||||||||||||||||||||||||||||||||||
| Format | 0 | 1 | 2 | 3 | 4 | 5 | ||||||||||||||||||||||||||||||||||||||||||
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
| SoF : 0xFF | PACKET SIZE | PACKET NUM | STATUS | CHECKSUM | ||||||||||||||||||||||||||||||||||||||||||||
| SoF | Start of Frame. Always 0xFF. | |||||||||||||||||||||||||||||||||||||||||||||||
| PACKET SIZE | Total packet size in bytes. | |||||||||||||||||||||||||||||||||||||||||||||||
| PACKET NUM | The packet number of the packet that generated the response. | |||||||||||||||||||||||||||||||||||||||||||||||
| STATUS | See Return Status section below. | |||||||||||||||||||||||||||||||||||||||||||||||
| CHECKSUM | Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover. | |||||||||||||||||||||||||||||||||||||||||||||||
| Status | Description |
|---|---|
| 0x81 | EOF Config Not Supported <THIS STATUS DNE IN LINX 1.0, WILL BE ADDED IN 1.1> |
| See Return Status for universal return statuses. |