Skip to content

spec set device wifi security type

Ken Sharp edited this page Dec 10, 2025 · 2 revisions

Set Device WIFI Security Type

Set the LINX device's WIFI Security Type.

LabVIEW

Developer Note

N/A

Command Packet

Set Device WIFI Security Type
Description Set the LINX device's WIFI Security Type.
Size 8 Bytes
Format 0 1 2 3 4 5 6 7
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x08 PACKET NUM CMD : 0x001E Security Type CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Packet Size In Bytes
PACKET NUM The Current Packet Number. This value increments with each new packet or repeats for a multi packet command.
CMD Set Device WIFI Security Type Command.
Security Type WIFI Security Type.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

LINX Target

Developer Note

N/A

Response Packet

Set Device WIFI Security Type Response
Description LINX device's response to Set Device WIFI Security Type Command
Size 6 Bytes
Format 0 1 2 3 4 5
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x06 PACKET NUM STATUS CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Total packet size in bytes.
PACKET NUM The packet number of the packet that generated the response.
STATUS See Return Status section below.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

Return Status

No function specific statuses. See Return Status for universal return statuses.

Related Links

LINX

Clone this wiki locally